Terazosin dimer impurity di-HCl is a dimer of Terazosin and an impurity of Terazosin. Terazosin is a quinazoline analogue and a competitive, orally bioactive α1-adrenoceptor receptor antagonist.

Physicochemical Properties

Molecular Formula	C24H29CLN8O4
Molecular Weight	528.991263151169
Exact Mass	564.176
CAS #	1486464-41-8
PubChem CID	44669936
Appearance	Typically exists as solid at room temperature
Hydrogen Bond Donor Count	4
Hydrogen Bond Acceptor Count	12
Rotatable Bond Count	6
Heavy Atom Count	38
Complexity	658
Defined Atom Stereocenter Count	0
SMILES	Cl.N1C(N)=C2C(C=C(C(=C2)OC)OC)=NC=1N1CCN(C2N=C3C(C=C(C(=C3)OC)OC)=C(N)N=2)CC1
InChi Key	SDPHRGYPGDUGEQ-UHFFFAOYSA-N
InChi Code	InChI=1S/C24H28N8O4.2ClH/c1-33-17-9-13-15(11-19(17)35-3)27-23(29-21(13)25)31-5-7-32(8-6-31)24-28-16-12-20(36-4)18(34-2)10-14(16)22(26)30-24;;/h9-12H,5-8H2,1-4H3,(H2,25,27,29)(H2,26,28,30);2*1H
Chemical Name	2-[4-(4-amino-6,7-dimethoxyquinazolin-2-yl)piperazin-1-yl]-6,7-dimethoxyquinazolin-4-amine;dihydrochloride
Synonyms	Terazosin dimer impurity dihydrochloride; 1486464-41-8; Terazosin dimer impurity (dihydrochloride); 104965-50-6; 2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine hydrochloride; 2,2'-(Piperazin-1,4-diyl)bis-(6,7-dimethoxyquinazolin-4-amine) Dihydrochloride;
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	Terazosin impurity; α-adrenergic receptor
References	[1]. Drugs for treatment of benign prostatic hyperplasia: affinity comparison at cloned alpha 1-adrenoceptor subtypes and in human prostate. J Auton Pharmacol. 1996 Feb;16(1):21-8.
Additional Infomation	1. We have previously shown that among alpha 1-adrenoceptor antagonists used or investigated for the treatment of benign prostatic hyperplasia, tamsulosin discriminates alpha 1-adrenoceptor subtypes in rat tissues whereas alfuzosin and naftopidil do not. We now expand these studies to additional drugs (doxazosin, terazosin) being used and/or investigated for this purpose, and have evaluated all of these drugs at cloned subtypes and in human prostate. 2. Competition binding studies were performed with [3H]-prazosin in membrane samples from rat spleen, kidney and cerebral cortex and human prostate and with cloned alpha 1-adrenoceptors expressed in COS cells. Doxazosin and terazosin did not discriminate alpha 1-adrenoceptor subtypes in rat kidney and cerebral cortex. In contrast, the subtypes present in the tissues were well discriminated by the alpha 1A-adrenoceptor-selective reference drug WB 4101. 3. Alfuzosin, doxazosin, naftopidil and terazosin did not discriminate cloned alpha 1-adrenoceptor subtypes transiently expressed in COS cells whereas tamsulosin and WB 4101 did. 4. In human prostate, alfuzosin, doxazosin, naftopidil and terazosin did not discriminate the alpha 1-adrenoceptor subtypes present in this tissue whereas tamsulosin and the alpha 1A-adrenoceptor-selective reference drugs WB 4101, phentolamine and 5-methylurapidil did. Based on data with the alpha 1A-adrenoceptor-selective drugs, human prostate contains alpha 1A- and alpha 1B-adrenoceptors in an approximate 70:30% ratio. 5. We conclude that tamsulosin, in common with WB 4101, but in contrast to alfuzosin, doxazosin, naftopidil, and terazosin is selective for alpha 1A-adrenoceptors which appear to dominate in the human prostate; the therapeutic relevance of this selectivity remains to be assessed in clinical studies.[1]

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	1.8904 mL	9.4520 mL	18.9039 mL
	5 mM	0.3781 mL	1.8904 mL	3.7808 mL
	10 mM	0.1890 mL	0.9452 mL	1.8904 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.