Pyridoxal 5'-phosphate hydrate is an endogenously produced metabolite.

Physicochemical Properties

Molecular Formula	C8H10NO6P
Molecular Weight	247.14
Exact Mass	247.024
CAS #	853645-22-4
Related CAS #	Pyridoxal 5'-phosphate monohydrate;41468-25-1;Pyridoxal Phosphate-d3;1354560-58-9
PubChem CID	1051
Appearance	Light yellow to yellow solid powder
Density	1.6±0.1 g/cm3
Boiling Point	565.7±60.0 °C at 760 mmHg
Melting Point	140-143ºC
Flash Point	296.0±32.9 °C
Vapour Pressure	0.0±1.6 mmHg at 25°C
Index of Refraction	1.641
LogP	-0.52
Hydrogen Bond Donor Count	3
Hydrogen Bond Acceptor Count	7
Rotatable Bond Count	4
Heavy Atom Count	16
Complexity	292
Defined Atom Stereocenter Count	0
InChi Key	NGVDGCNFYWLIFO-UHFFFAOYSA-N
InChi Code	InChI=1S/C8H10NO6P/c1-5-8(11)7(3-10)6(2-9-5)4-15-16(12,13)14/h2-3,11H,4H2,1H3,(H2,12,13,14)
Chemical Name	(4-formyl-5-hydroxy-6-methylpyridin-3-yl)methyl dihydrogen phosphate
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Additional Infomation

Pyridoxal 5'-phosphate is the monophosphate ester obtained by condensation of phosphoric acid with the primary hydroxy group of pyridoxal. It has a role as a coenzyme, a human metabolite, an Escherichia coli metabolite, a Saccharomyces cerevisiae metabolite, a mouse metabolite, an EC 2.7.7.7 (DNA-directed DNA polymerase) inhibitor and a cofactor. It is a vitamin B6 phosphate, a member of methylpyridines, a monohydroxypyridine and a pyridinecarbaldehyde. It is functionally related to a pyridoxal. It is a conjugate acid of a pyridoxal 5'-phosphate(2-). This is the active form of vitamin B6 serving as a coenzyme for synthesis of amino acids, neurotransmitters (serotonin, norepinephrine), sphingolipids, aminolevulinic acid. During transamination of amino acids, pyridoxal phosphate is transiently converted into pyridoxamine phosphate (pyridoxamine). Medicure's MC-1 drug is a cardio-protectant, designed to reduce the damage to the heart when arteries are blocked and when they are subsequently reopened after bypass surgery. Pyridoxal 5'-phosphate is a metabolite found in or produced by Escherichia coli (strain K12, MG1655). Pyridoxal phosphate has been reported in Arabidopsis thaliana, Homo sapiens, and other organisms with data available. Pyridoxal Phosphate is the active form of vitamin B6 and a coenzyme for many pyridoxal phosphate (PLP)-dependent enzymes. PLP is involved in numerous enzymatic transamination, decarboxylation and deamination reactions; it is necessary for the synthesis of amino acids and amino acid metabolites, and for the synthesis and/or catabolism of certain neurotransmitters, including the conversion of glutamate into gamma-aminobutyric acid (GABA) and levodopa into dopamine. PLP can be used as a dietary supplement in cases of vitamin B6 deficiency. Reduced levels of PLP in the brain can cause neurological dysfunction. Pyridoxal 5'-phosphate is a metabolite found in or produced by Saccharomyces cerevisiae. This is the active form of VITAMIN B 6 serving as a coenzyme for synthesis of amino acids, neurotransmitters (serotonin, norepinephrine), sphingolipids, aminolevulinic acid. During transamination of amino acids, pyridoxal phosphate is transiently converted into pyridoxamine phosphate (PYRIDOXAMINE). See also: Pyridoxal (annotation moved to). Drug Indication For nutritional supplementation and for treating dietary shortage or imbalance. Investigated for use/treatment in coronary artery disease. Mechanism of Action Pyridoxal Phosphate is a coenzyme of many enzymatic reactions. It is the active form of vitamin B6 which comprises three natural organic compounds, pyridoxal, pyridoxamine and pyridoxine. Pyridoxal phosphate acts as a coenzyme in all transamination reactions, and in some oxylation and deamination reactions of amino acids. The aldehyde group of pyridoxal phosphate forms a Schiff-base linkage with the epsilon-amino group of a specific lysine group of the aminotransferase enzyme. The alpha-amino group of the amino acid substrate displaces the epsilon-amino group of the active-site lysine residue. The resulting aldimine becomes deprotonated to become a quinoid intermediate, which in turn accepts a proton at a different position to become a ketimine. Ketimine becomes hydrolyzed so that the amino group remains on the protein complex. MC-1 is a biologically active natural product which can be regarded as a chemical entity that has been evolutionarily selected and validated for binding to particular protein domains. Thus, its underlying structural architecture, or scaffold, has already been biologically established as safe and active, providing a powerful guiding principle for novel drug and library development. Pharmacodynamics The two major forms of vitamin B6 are pyridoxine and pyridoxamine. In the liver they are converted to pyridoxal phosphate (PLP) which is a cofactor in many reactions of amino acid metabolism. PLP also is necessary for the enzymatic reaction governing the release of glucose from glycogen. Pyroluria is one potential cause of vitamin B6 deficiency.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	4.0463 mL	20.2314 mL	40.4629 mL
	5 mM	0.8093 mL	4.0463 mL	8.0926 mL
	10 mM	0.4046 mL	2.0231 mL	4.0463 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.