Tubulin inhibitor 33 is a tubulin polymerization inhibitor that can suppress tubulin polymerization in a dose-dependent manner with IC50 of 9.05 μM. Tubulin inhibitor 33 has anti-tumor and apoptosis-inducing effects and may be utilized in anti-tumor research.

Physicochemical Properties

CAS #	2944462-67-1
Appearance	Typically exists as solid at room temperature
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	IC50: 9.05 μM (tubulin)[1]
ln Vitro	Tubulin inhibitor 33 (Compound 3a) (0–5 nM; 24-48 hours) causes G2/M cell cycle arrest and apoptosis in addition to inhibiting the growth, migration, and colony formation of HepG-2 tumor cells [1]. [1]. 33 Tubulin Inhibitor
ln Vivo	Tubulin inhibitor 33 (Compound 3a) (5 mg/kg; intraperitoneal injection daily for 14 days) had a TGI of 62.96%, which was a considerable reduction in the growth of melanoma tumors [1].
Cell Assay	Cell Proliferation Assay[1] Cell Types: MCF-7, HeLa, B16-F10, HepG-2 cells Tested Concentrations: 0- 5 nM Incubation Duration: 24-48 hrs (hours) Experimental Results: demonstrated the antiproliferative activity against the growth of cancer cells with an average IC50 value of 4.5 nM. Suppressed the formation of HepG-2 colonies in a dose-dependent manner, with the colony-forming ability of HepG-2 cells being Dramatically suppressed. demonstrated the antimigratory effects against HepG-2 cells. Induced G2/M arrest and apoptosis in HepG-2 cells. Immunofluorescence[1] Cell Types: HepG-2 cells Tested Concentrations: 0-5 nM Incubation Duration: 12 hrs (hours) Experimental Results: Effectively inhibited tubulin polymerization in vitro and disrupted microtubule dynamics.
Animal Protocol	Animal/Disease Models: B16-F10 melanoma model in C57 mice[1] Doses: 5 mg/kg Route of Administration: intraperitoneal (ip)injection Experimental Results: Dramatically inhibited melanoma tumor growth with a TGI of 62.96%.
References	[1]. Ren Y, et.al. X-ray Crystal Structure-Guided Discovery of Novel Indole Analogues as Colchicine-Binding Site Tubulin Inhibitors with Immune-Potentiating and Antitumor Effects against Melanoma. J Med Chem. 2023 May 25;66(10):6697-6714.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)