Olaptesed pegol (NOX-A12) L-oligoribonucleotide aptamer targeting CXCL12 based on pegylated structure. Olaptesed pegol neutralizes CXCL12, and CXCL12 inhibition mobilizes chronic lymphocytic leukemia cells into the circulation and prevents their homing into the protective microenvironment.

Physicochemical Properties

Molecular Formula	C18H37N2O10P
Molecular Weight	472.467547178268
Exact Mass	472.218
CAS #	1390628-22-4
Related CAS #	Olaptesed pegol sodium
PubChem CID	86278354
Appearance	Typically exists as solid at room temperature
LogP	-1.8
Hydrogen Bond Donor Count	3
Hydrogen Bond Acceptor Count	10
Rotatable Bond Count	21
Heavy Atom Count	31
Complexity	518
Defined Atom Stereocenter Count	0
InChi Key	QJAGBAPUFWBVSD-UHFFFAOYSA-N
InChi Code	InChI=1S/C18H37N2O10P/c1-26-11-13-28-10-8-20(18(22)16-29-14-12-27-2)15-17(21)19-7-5-3-4-6-9-30-31(23,24)25/h3-16H2,1-2H3,(H,19,21)(H2,23,24,25)
Chemical Name	6-[[2-[[2-(2-methoxyethoxy)acetyl]-[2-(2-methoxyethoxy)ethyl]amino]acetyl]amino]hexyl dihydrogen phosphate
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	CXCL12[1]
References	[1]. Steurer M, Montillo M, Scarfò L, Mauro FR, Andel J, Wildner S, Trentin L, Janssens A, Burgstaller S, Frömming A, Dümmler T, Riecke K, Baumann M, Beyer D, Vauléon S, Ghia P, Foà R, Caligaris-Cappio F, Gobbi M. Olaptesed pegol (NOX-A12) with bendamustine and rituximab: a phase IIa study in patients with relapsed/refractory chronic lymphocytic leukemia. Haematologica. 2019 Oct;104(10):2053-2060.
Additional Infomation	Olaptesed Pegol has been investigated for the treatment of Hematopoietic Stem Cell Transplantation. Lexaptepid pegol has been used in trials studying the treatment of Anemia, Inflammation, Chronic Diseases, End Stage Renal Disease, and Anemia of Chronic Disease. Lexaptepid Pegol is a proprietary 44-nucleotide L-stereoisomer RNA oligonucleotide conjugated to a 40 kDa polyethylene glycol (PEG) that targets hepcidin with potential anti-anemic activity. Upon intravenous or subcutaneous administration, lexaptepid pegol binds to hepcidin and prevents it from binding to the iron channel ferroportin, located on the basolateral surface of gastrointestinal enterocytes and the plasma membrane of macrophages. This prevents hepcidin-induced internalization and degradation of ferroportin, thus decreasing macrophage iron retention. In turn, binding of NOX-H94 to hepcidin normalizes plasma iron levels and increases erythropoiesis. This may inhibit anemia caused by inflammation. Hepcidin, a peptide hormone that plays a key role in the homeostasis of systemic iron, is upregulated during acute and chronic inflammation in response to cytokines. The unique mirror-image configuration of this agent renders it resistant to hydrolysis and shows a low antigenicity profile. Pegylation increases the half-life of this agent. Olaptesed Pegol is a 45-mer L-stereoisomer RNA oligonucleotide linked to a 40 kDa polyethyleneglycol that targets the small chemokine stromal cell-derived factor 1 (SDF-1 or CXCL12) with potential antineoplastic and hematopoietic stem cell-mobilization activities. SDF-1 targeted agent NOX-A12 specifically binds to SDF-1 thereby preventing the binding of SDF-1 to its receptors CXCR4 and CXCR7 blocking the subsequent receptor activation. This may prevent angiogenesis, tumor cell proliferation, invasion and metastasis and could sensitize tumor cells to chemotherapy. In addition, inhibition of SDF-1/CXCR4 interaction may induce mobilization of hematopoietic cells from the bone marrow into blood. The unique mirror-image configuration of this agent renders it resistant to hydrolysis and does not hybridize with native nucleic acids. Furthermore, this agent does not induce the innate immune response and has shown a favorable immunogenicity profile.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	2.1165 mL	10.5827 mL	21.1654 mL
	5 mM	0.4233 mL	2.1165 mL	4.2331 mL
	10 mM	0.2117 mL	1.0583 mL	2.1165 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.