Physicochemical Properties
| Molecular Formula | C19H18CL2FN3O2 |
| Molecular Weight | 410.27 |
| Appearance | Typically exists as solid at room temperature |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| ln Vitro | KRASG12C NSCLC cell growth is efficiently and specifically inhibited by KRASG12C IN-1 (compound 20a) (72 h). The NCI-H358 and NCI-H23 cells can be inhibited at IC50 values of 0.5 and 1.3 μM, respectively. It is the KRASG12S and KRASWT cells' selectivity. 21 times [1] and 7 times. In KRASG12C-mutant NCIH358 cells, KRASG12C IN-1 (0.5-8.0 μM; 6 h) decreases the phosphorylation of ERK and AKT [1]. |
| ln Vivo | In the H358 xenograft model, KRASG12C IN-1 (Compound 20a) (10–15 mg/kg; i.p. every 2 days for 21 days) prevents tumor growth by blocking KRASG12C signaling [1]. |
| Cell Assay |
Western Blot Analysis[1] Cell Types: NCI-H358 and NCI-H2228 cells Tested Concentrations: 0.5, 1.0, 2.0, 4.0, 8.0 μM Incubation Duration: 6 hrs (hours) Experimental Results: demonstrated no impact on KRAS signaling in KRASWT NCI-H2228 cells. The pERK level diminished by 40%-90%, and the pAKT level was down-regulated by 30%-90% in NCI-H358 cells. |
| Animal Protocol |
Animal/Disease Models: Female BALB/c Nude mice were injected subcutaneously (sc) with NCI-H358 cells[1] Doses: 10, 15 mg/kg Route of Administration: Ip every two days for 21 days Experimental Results: Dramatically inhibited tumor growth while the body weight of mice was not influenced. |
| References | [1]. Cheng R, et, al. Design, synthesis, and evaluation of 4(1H)-quinolinone and urea derivatives as KRASG12C inhibitors with potent antitumor activity against KRAS-mutant non-small cell lung cancer. Eur J Med Chem. 2022 Dec 15;244:114808. |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 2.4374 mL | 12.1871 mL | 24.3742 mL | |
| 5 mM | 0.4875 mL | 2.4374 mL | 4.8748 mL | |
| 10 mM | 0.2437 mL | 1.2187 mL | 2.4374 mL |