Physicochemical Properties
| Molecular Formula | C29H32D5N7O5S |
| Molecular Weight | 600.74 |
| CAS # | 2403760-72-3 |
| Related CAS # | Dosimertinib-d3;2403760-70-1 |
| Appearance | White to yellow solid powder |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment, avoid exposure to moisture. |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| ln Vitro | In a dose-dependent manner, dosimertinib mesylate (compound 2h)(1, 10, 100, 100 nM; 2h) lowers the levels of p-EGFR and p-ERK protein [1]. |
| ln Vivo | Mice treated orally with dosimertinib mesylate (0.75, 1.5, or 3 mg/kg; once daily for 24 days) exhibit antitumor activity [1]. |
| Cell Assay |
Cell Proliferation Assay[1] Cell Types: A431, H1975, EGFR-L858/T790M BaF3, EGFR-del19/T790M BaF3 Cells Tested Concentrations: 0-10 µM Incubation Duration: 72 h Experimental Results: demonstrated antiproliferative activity with IC50s of 243.9, 28.4, 18.0, 3.5 nM for A431, H1975, EGFR-L858/T790M BaF3, EGFR-del19/T790M BaF3 cells, respectively. Western Blot Analysis[1] Cell Types: A431, H1975 cells Tested Concentrations: 1, 10, 100, 100 nM Incubation Duration: 2 h Experimental Results: diminished the expression of p-EGFR and p-ERK protein levels in a dose-dependent mannet when co-incubated with 50 ng/mL EGF. |
| Animal Protocol |
Animal/Disease Models: 18-20 g, BALB/c nude mice (H1975 mouse xenograft model)[1] Doses: 0.75, 1.5, 3 mg/kg Route of Administration: po (oral gavage); daily for 24 days Experimental Results: Dramatically decreased tumor size with tumor growth Inhibition (TGI) of 72.94% and 97.62% at 1.5, 3 mg/kg, respectively. |
| References |
[1]. Discovery of Dosimertinib, a Highly Potent, Selective, and Orally Efficacious Deuterated EGFR Targeting Clinical Candidate for the Treatment of Non-Small-Cell Lung Cancer. J Med Chem. 2021 Jan 28;64(2):925-937. |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.6646 mL | 8.3231 mL | 16.6461 mL | |
| 5 mM | 0.3329 mL | 1.6646 mL | 3.3292 mL | |
| 10 mM | 0.1665 mL | 0.8323 mL | 1.6646 mL |