Bruceine J is a quassinoid, a naturally occurring compound that can be extracted from the fruits of Br. jaVanica. Bruceine J has anti-babesi activity.

Physicochemical Properties

Molecular Formula	C25H32O11
Molecular Weight	508.514988899231
Exact Mass	508.194
CAS #	948038-38-8
PubChem CID	23656476
Appearance	Typically exists as solid at room temperature
Density	1.5±0.1 g/cm3
Boiling Point	768.3±60.0 °C at 760 mmHg
Flash Point	260.2±26.4 °C
Vapour Pressure	0.0±5.9 mmHg at 25°C
Index of Refraction	1.619
LogP	1.34
Hydrogen Bond Donor Count	4
Hydrogen Bond Acceptor Count	11
Rotatable Bond Count	5
Heavy Atom Count	36
Complexity	1080
Defined Atom Stereocenter Count	10
SMILES	O1C[C@@]23[C@H]4C[C@H]5C(C)=C(C(C[C@]5(C)[C@H]2[C@H]([C@@H]([C@]1(C(=O)O)[C@@H]3[C@H](C(=O)O4)OC(CC(C)C)=O)O)O)=O)O
InChi Key	COWHTTGEYSMEQL-IELPQYESSA-N
InChi Code	InChI=1S/C25H32O11/c1-9(2)5-14(27)36-17-19-24-8-34-25(19,22(32)33)20(30)16(29)18(24)23(4)7-12(26)15(28)10(3)11(23)6-13(24)35-21(17)31/h9,11,13,16-20,28-30H,5-8H2,1-4H3,(H,32,33)/t11-,13+,16+,17+,18+,19+,20-,23-,24+,25-/m0/s1
Chemical Name	(1R,2S,3R,6R,8R,13S,14R,15R,16S,17S)-10,15,16-trihydroxy-9,13-dimethyl-3-(3-methylbutanoyloxy)-4,11-dioxo-5,18-dioxapentacyclo[12.5.0.01,6.02,17.08,13]nonadec-9-ene-17-carboxylic acid
Synonyms	bruceine J; (1R,2S,3R,6R,8R,13S,14R,15R,16S,17S)-10,15,16-trihydroxy-9,13-dimethyl-3-(3-methylbutanoyloxy)-4,11-dioxo-5,18-dioxapentacyclo[12.5.0.01,6.02,17.08,13]nonadec-9-ene-17-carboxylic acid; 948038-38-8; (1R,2S,3R,6R,8R,13S,14R,15R,16S,17S)-10,15,16-trihydroxy-9,13-dimethyl-3-(3-methylbutanoyloxy)-4,11-dioxo-5,18-dioxapentacyclo(12.5.0.01,6.02,17.08,13)nonadec-9-ene-17-carboxylic acid; CHEMBL399970;
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	Natural quassinoid
ln Vitro	Bruceine J (compond 2) has anti-babesian action against Babesia gibsoni, with an IC50 value of 742 ng/mL [1]. Boiled extracts derived from 28 Indonesian medicinal plants were screened for their antibabesial activity against Babesia gibsoni in vitro. Of these extracts, the fruit of Brucea javanica was the most active in inhibiting parasite growth at a concentration of 10 microg/mL. Bioassay-guided fractionation of the fruit extract of Br. javanica led to the isolation of two new quassinoids, bruceantinol B and bruceine J, and the structures of these compounds were elucidated on the basis of their spectroscopic data and by chemical transformation to known compounds. In addition, the known quassinoids bruceines A-D, bruceantinol, and yadanziolide A were isolated. Antibabesial activities were also examined in vitro, and bruceine A and bruceantinol were shown to be more potent than diminazene aceturate, a drug (IC50 = 103 ng/mL) used clinically against B. gibsoni, with IC50 values of 4 and 12 ng/mL, respectively.
Enzyme Assay	Antibabesial Assay [1] The in vitro assay against B. gibsoni was described in detail in a previous paper. (The Journal of veterinary medical science / the Japanese Society of Veterinary Science (2004), 66 (7), 871-4 ISSN:0916-7250.) In this study, diminazene aceturate (Ganaseg) was used as control.
References	[1]. Screening of Indonesian medicinal plant extracts for antibabesial activity and isolation of new quassinoids from Brucea javanica. J Nat Prod. 2007 Oct;70(10):1654-7.
Additional Infomation	bruceine J has been reported in Brucea javanica with data available.

Solubility Data

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	1.9665 mL	9.8325 mL	19.6649 mL
	5 mM	0.3933 mL	1.9665 mL	3.9330 mL
	10 mM	0.1966 mL	0.9832 mL	1.9665 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.