N-Methyldopamine HCl is the precursor of epinephrine in the adrenal medulla. N-Methyldopamine HCl is a modification of dopamine (DA) and retains agonist activity at the DA1 receptor. N-Methyldopamine HCl has universal surface coating and the ability to utilize surface catechols for secondary reactions. N-Methyldopamine HCl may be utilized in heart failure (HF)-related research.

Physicochemical Properties

Molecular Formula	C9H13NO2.HCL
Molecular Weight	203.66596
Exact Mass	203.071
CAS #	62-32-8
PubChem CID	86470
Appearance	Typically exists as solid at room temperature
Boiling Point	328.6ºC at 760 mmHg
Melting Point	174-176ºC
Flash Point	154.3ºC
LogP	2.052
Hydrogen Bond Donor Count	4
Hydrogen Bond Acceptor Count	3
Rotatable Bond Count	3
Heavy Atom Count	13
Complexity	130
Defined Atom Stereocenter Count	0
SMILES	CNCCC1=CC(=C(C=C1)O)O.Cl
InChi Key	JCDRZCWRRLKLTB-UHFFFAOYSA-N
InChi Code	InChI=1S/C9H13NO2.ClH/c1-10-5-4-7-2-3-8(11)9(12)6-7;/h2-3,6,10-12H,4-5H2,1H3;1H
Chemical Name	4-[2-(methylamino)ethyl]benzene-1,2-diol;hydrochloride
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment, avoid exposure to moisture.
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

ln Vitro

N-methyldopamine hydrochloride has faster coating rates and much better surface coating characteristics. Coatings containing N-methyldopamine hydrochloride facilitate solid surface cell adhesion and can be post-functionalized [1].

References

[1]. Effect of N-Methylation on Dopamine Surface Chemistry. Langmuir. 2022 May 24;38(20):6404-6410. [2]. Laduron P. N-Methyldopamine (epinine), a precursor of adrenaline in the adrenal medulla. Arch Int Pharmacodyn Ther. 1972 Apr;196:Suppl 196:304-. [3]. Effects of long-term therapy with oral ibopamine on resting hemodynamics and exercise capacity in patients with heart failure: relationship to the generation of N-methyldopamine and to plasma norepinephrine levels. Circulation. 1986 Apr;.

Solubility Data

Solubility (In Vitro)

H2O : ~125 mg/mL (~613.74 mM)

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	4.9099 mL	24.5495 mL	49.0990 mL
	5 mM	0.9820 mL	4.9099 mL	9.8198 mL
	10 mM	0.4910 mL	2.4550 mL	4.9099 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.