Physicochemical Properties
| Molecular Formula | C31H38FN3O2S |
| Molecular Weight | 535.72 |
| Appearance | Typically exists as solid at room temperature |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| Targets | COX-2 iNOS |
| ln Vitro | iNOS/COX-2-IN-1 (0.625-40 μM; 24 h) had no significant cytotoxicity to RAW 264.7 cells at a concentration of 5 μM[1]. iNOS/COX-2-IN-1 (2.5-10 μM; 1 h) significantly inhibited LPS-induced NO production, with a NO inhibition rate of 45.38% (5 μM). It inhibited the expression of TNF-α and COX-2 in a concentration-dependent manner. It effectively inhibited the mRNA expression of pro-inflammatory cytokines. It exerted its anti-inflammatory effect by inhibiting the activation of the NF-κB signaling pathway[1]. |
| Cell Assay |
Cell Cytotoxicity Assay[1] Cell Types: RAW 264.7 Tested Concentrations: 0.625, 1.25, 2.5, 5, 10, 20, 40 μM Incubation Duration: 24 h Experimental Results: The survival rate of RAW 264.7 cells was 97.44% at a concentration of 5 μM, indicating low cytotoxicity. Western Blot Analysis[1] Cell Types: RAW 264.7 Tested Concentrations: 2.5, 5, 10 μM Incubation Duration: 1 h Experimental Results: Dose-dependent inhibited the expression of iNOS and COX-2 proteins. Significantly inhibited LPS-induced phosphorylation of NF-κB p65 and degradation of IκBα, and reduced translocation of NF-κB p65 from the cytoplasm to the nucleus. Significantly inhibited LPS-induced phosphorylation of ERK, JNK and p38 MAPK. Real Time qPCR[1] Cell Types: RAW 264.7 Tested Concentrations: 2.5, 5, 10 μM Incubation Duration: 24 h Experimental Results: Significantly reduced mRNA expression levels of TNF-α, iNOS, IL-6 and COX-2. |
| References |
[1]. Design, synthesis and molecular modeling of novel D-ring substituted steroidal 4,5-dihydropyrazole thiazolinone derivatives as anti-inflammatory agents by inhibition of COX-2/iNOS production and down-regulation of NF-κB/MAPKs in LPS-induced RAW264.7 macrophage cells. Eur J Med Chem. 2024 Apr 27;272:116460. |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.8666 mL | 9.3332 mL | 18.6665 mL | |
| 5 mM | 0.3733 mL | 1.8666 mL | 3.7333 mL | |
| 10 mM | 0.1867 mL | 0.9333 mL | 1.8666 mL |