Physicochemical Properties
| CAS # | 83380-82-9 |
| Appearance | White to off-white solid powder |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| Targets | glycoprotein; glycosaminoglycans; collagen |
| ln Vivo | Vitronectin is a multifunctional glycoprotein present in blood and in the extracellular matrix. It binds glycosaminoglycans, collagen, plasminogen and the urokinase-receptor, and also stabilizes the inhibitory conformation of plasminogen activation inhibitor-1. By its localization in the extracellular matrix and its binding to plasminogen activation inhibitor-1, vitronectin can potentially regulate the proteolytic degradation of this matrix. In addition, vitronectin binds to complement, to heparin and to thrombin-antithrombin III complexes, implicating its participation in the immune response and in the regulation of clot formation. The biological functions of vitronectin can be modulated by proteolytic enzymes, and by exo- and ecto-protein kinases present in blood. Vitronectin contains an RGD sequence, through which it binds to the integrin receptor alpha v beta 3, and is involved in the cell attachment, spreading and migration. Antibodies against alpha v beta 3 or synthetic peptides containing an RGD sequence are now being tested as therapeutic agents in the treatment of human cancers, bone diseases (e.g. osteoporosis) and in pathological disorders which involve angiogenesis [1]. |
| References |
[1]. Vitronectin. Int J Biochem Cell Biol. 1999 May;31(5):539-44. |
| Additional Infomation |
In view of the involvement of the integrin αvβ3 in angiogenesis, vitronectin may play an important role in wound healing and in tumorprogression. Since anti-integrin antibodies and integrin antagonists (e.g. cyclic RGD peptides or disintegrins) have been shown to inhibit angiogenesis and to induce programmed cell death, such reagents are currently studied in animal models of cancer and of blinding eye diseases. These studies are aimed at devising new therapeutic strategies against human pathologies. Vitronectin deposition has been detected in areas of fibrosis and necrosis in a variety of diseases, including membranous nephropathy, arteriosclerosis and degenerative central nervous system disorders. Deposition of vitronectin in association with plasminogen activator inhibitor-1 (i.e. formation of vitronectin–plasminogen activator inhibitor-1 complexes) alters the balance of the fibrinolytic system to favor inhibition of fibrinolysis and development of necrosis. The urokinase receptor has been recently identified as an additional cell surface receptor for vitronectin. It was shown that active plasminogen activator inhibitor-1 dissociates bound vitronectin from the urokinase receptor and thus detaches cells from their vitronectin substratum. Such activity of plasminogen activator inhibitor-1 may explain why high levels of this inhibitor are considered a poor prognosis for many metastatic cancers. Developing compounds targeted to the urokinase receptor-vitronectin binding may also have therapeutic use. In addition, it was recently shown that vitronectin increases the secretion of the matrix metalloproteinase-2, leading to an enhanced catalytic activity against gelatin. This finding highlights an additional activity of vitronectin, whereby adhesion of invasive cells to vitronectin regulates subsequent invasive behavior. Inhibitors of matrix metalloproteinase-2 are also considered as potential therapeutic agents in cancer research. Interestingly, a genetic deficiency of vitronectin has not been reported so far in humans or in other mammals. However, null mice completely deficient in vitronectin were found to be normal with respect to fertility, development and survival, suggesting that this protein is either dispensable, or that in its absence the functions of vitronectin are replaced by alternative constituents of the extracellular matrix. In view of the above, it is rather difficult to establish unequivocally the overall regulatory role of vitronectin, its involvement in pathogenesis and its importance as a target for pharmacological intervention. However, its multifaceted regulatory profile in vitro and in vivo, makes it quite likely that in the near future this molecule is going to assume a central position in basic as well as pharmacological and clinical research. [1] |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |