Physicochemical Properties
| Molecular Formula | C239H371N66O71S |
| Molecular Weight | 5394.94 |
| Related CAS # | Super-TDU;1599441-71-0 |
| Appearance | Typically exists as solid at room temperature |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| ln Vitro | Super-TDU TFA inhibits the expression of CTGF, CYR61, and CDX2, the target genes of YAP-TEADs. The GC cell lines MGC-803, BGC-823, and HGC27 exhibit reduced colony formation and cell survival when exposed to super-TDU TFA[1]. |
| ln Vivo | Super-TDU TFA (intravenous injection; 50 μg/kg or 500 μg/kg; daily) significantly reduces tumor weights, diameters, and YAP target genes in mice in a dose-dependent manner[1]. The results of Super-TDU TFA (Intravenous Injection; 250 μg/kg and 500 μg/kg) in mice show that the t1/2α is 0.78 hours and 0.82 hours, the Cmax is 6.12 ng/mL and 13.3 ng/mL, and the CL is 7.41 ml/min/kg and 7.72 ml/min/kg for the 250 μg/kg and 500 Ήg/kg, respectively[1]. |
| Animal Protocol |
Animal/Disease Models: BALB/cA nu/nu (nude) mice[1] Doses: 50 μg/kg or 500 μg/kg Route of Administration: intravenous (iv) Injection ; per day Experimental Results: diminished the sizes, weights of tumors, and YAP target genes in a dose-dependent manner. Animal/Disease Models: BALB/cA nu/nu (nude) mice[1] Doses: 250 μg/kg or 500 μg/kg (pharmacokinetic/PK Study) Route of Administration: intravenous (iv) Injection Experimental Results: The t1/2α is 0.78 hrs (hours) and 0.82 hrs (hours); the Cmax is 6.12 ng/mL and 13.3 ng/mL; the CL is7.41 ml/min/kg and 7.72 ml/min/kg for 250 μg/kg and 500 μg/kg in mice, respectively. |
| References |
[1]. A peptide mimicking VGLL4 function acts as a YAP antagonist therapy against gastric cancer. Cancer Cell. 2014 Feb 10;25(2):166-80. |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 0.1854 mL | 0.9268 mL | 1.8536 mL | |
| 5 mM | 0.0371 mL | 0.1854 mL | 0.3707 mL | |
| 10 mM | 0.0185 mL | 0.0927 mL | 0.1854 mL |