Sulfachloropyridazine (sodium) is a sulfonamide antibiotic that can inhibit bacterial growth.

Physicochemical Properties

Molecular Formula	C10H8CLN4NAO2S
Molecular Weight	306.70
Exact Mass	305.995
CAS #	23282-55-5
Related CAS #	Sulfachloropyridazine-d4;1795037-54-5;Sulfachloropyridazine;80-32-0
PubChem CID	15622288
Appearance	Typically exists as solid at room temperature
Density	1.588g/cm3
Boiling Point	559.7ºC at 760 mmHg
Flash Point	292.3ºC
Vapour Pressure	1.48E-12mmHg at 25°C
LogP	3.033
Hydrogen Bond Donor Count	1
Hydrogen Bond Acceptor Count	6
Rotatable Bond Count	3
Heavy Atom Count	19
Complexity	370
Defined Atom Stereocenter Count	0
SMILES	[Na]N(S(=O)(C1=CC=C(N)C=C1)=O)C2=NN=C(Cl)C=C2
InChi Key	ODWMXYHUKDMPTR-UHFFFAOYSA-N
InChi Code	InChI=1S/C10H8ClN4O2S.Na/c11-9-5-6-10(14-13-9)15-18(16,17)8-3-1-7(12)2-4-8;/h1-6H,12H2;/q-1;+1
Chemical Name	sodium;(4-aminophenyl)sulfonyl-(6-chloropyridazin-3-yl)azanide
Synonyms	Sulfachloropyridazine sodium; 23282-55-5; Prinzone; sulfachlorpyridazine sodium; Sodium sulfachlorpyridazine; Sodium sulfachloropyridazine; Sulfachlorpyridazine sodium salt; N1LMA4960O;
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	Sulfonamide antibiotic
ln Vitro	In this study, swine manure containing sulfachloropyridazine sodium (SCPS) and zinc was subjected to mesophilic (37°C) anaerobic digestion (AD). The absolute abundances (AAs) of antibiotic resistance genes (ARGs) were evaluated, as well as intI1 and intI2, and the degradation of SCPS according to variation in the amount of bio-available zinc (bio-Zn). In digester that only contained SCPS, the concentrations of SCPS were lower than that digesters both contain SCPS and Zn. Compared with the control digester, the addition of SCPS increased the AAs of sul1, sul3, drfA1, and drfA7 by 1.3-13.1 times. However, compared with the digester with SCPS but no added Zn, the AAs of sul3, drfA1, and drfA7 were decreased by 21.4-70.3% in the presence of SCPS and Zn, whereas sul1 and sul2 increased 1.3-10.7 times. There were significant positive correlations (P<0.05) between the concentrations of SCPS with several ARGs and bio-Zn[1].
References	[1]. Zhang R, et al. Relationships between sulfachloropyridazine sodium, zinc, and sulfonamide resistance genes during the anaerobic digestion of swine manure. Bioresour Technol. 2017 Feb;225:343-348.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	3.2605 mL	16.3026 mL	32.6052 mL
	5 mM	0.6521 mL	3.2605 mL	6.5210 mL
	10 mM	0.3261 mL	1.6303 mL	3.2605 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.