Sodium tripolyphosphate (STPP), 85% (Sodium triphosphate pentabasic, 85%) is a biochemical used as a pH adjuster, chelating agent, and detergent builder.

Physicochemical Properties

Molecular Formula	NA5P3O10
Molecular Weight	367.86
Exact Mass	367.819
CAS #	7758-29-4
Related CAS #	10380-08-2 (Parent)
PubChem CID	24455
Appearance	White powder Two crystalline forms of anhydrous salt (transition point 417 °C)
Density	>1.5 g/cm3 (20ºC)
Melting Point	622 °C
LogP	1.496
Hydrogen Bond Donor Count	0
Hydrogen Bond Acceptor Count	10
Rotatable Bond Count	2
Heavy Atom Count	18
Complexity	241
Defined Atom Stereocenter Count	0
SMILES	P(=O)([O-])(OP(=O)([O-])[O-])OP(=O)([O-])[O-].[Na+].[Na+].[Na+].[Na+].[Na+]
Synonyms	Sodium triphosphate pentabasic, 85%
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

ADME/Pharmacokinetics	Absorption, Distribution and Excretion If ingested in large amounts nausea, vomiting and diarrhea are probable. Thought to be hydrolyzed to (ortho)phosphates before absorption. If appreciable amounts of the intact polymer are absorbed from the alimentary tract, hypocalcemic tetany may be a danger due to the binding (chelation) of ionized calcium. Hypocalcemic tetany apparently occurred in one ingestion episode. /Tripolyphosphate/ Metabolism / Metabolites THOUGHT TO BE HYDROLYZED TO (ORTHO)PHOSPHATES BEFORE ABSORPTION. /TRIPOLYPHOSPHATE/ In the body, phosphorus is converted to phosphates. /Phosphorus/
References	[1]. Studies on effect of pH on cross-linking of chitosan with sodium tripolyphosphate: a technical note. AAPS PharmSciTech. 2006 Jun 2;7(2):E50.
Additional Infomation	Sodium tripolyphosphate is an inorganic compound with formula Na5P3O10 and the sodium salt of the polyphosphate penta-anion. It is used as a component of a wide range domestic and industrial products, particularly detergents. Mechanism of Action The effects of condensed phosphate ( ... sodium tripolyphosphate ... ) on the growth of Streptococcus mutans, sugar metabolism in vitro, and S mutans-induced caries of hamsters were studied. All condensed phosphates depressed the growth of S mutans. This growth inhibition was reversed by divalent metal ions. Thus, the chelating capacity of condensed phosphate is responsible for their antibacterial actions. Condensed phosphates depressed lactate production from glucose and sucrose by the S mutans.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	2.7184 mL	13.5921 mL	27.1843 mL
	5 mM	0.5437 mL	2.7184 mL	5.4369 mL
	10 mM	0.2718 mL	1.3592 mL	2.7184 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.