Nafarelin is a gonadotropin-releasing hormone agonist (GnRH agonist) which acts as an analogue of GnRH. Nafarelin increases the release of FSH and LH by the anterior pituitary, which in turn leads to an increase of estrogen/progesterone. When administered, Nafarelin has the purpose of causing increase estrogen that will negatively feed back upon hypothalamus to decrease GnRH ( negative feedback loop ) Through negative feedback, Nafarelin causes a decrease in pituitary secretion of gonadotropins luteinizing hormone (LH) and follicle stimulating hormone (FSH). Nafarelin may be used in the treatment of estrogen-dependent conditions (such as endometriosis or uterine fibroids), to treat central precocious puberty, and to control ovarian stimulation in IVF. It is normally delivered via a nasal spray. Nafarelin acetate is marketed by Searle (now part of Pfizer) under the brand name Synarel.
Physicochemical Properties
| Molecular Formula | C68H89N17O16 |
| Molecular Weight | 1400.563 |
| Exact Mass | 1399.67 |
| CAS # | 86220-42-0 |
| Related CAS # | 86220-42-0 (acetate);76932-56-4; |
| PubChem CID | 25079425 |
| Appearance | Typically exists as solid at room temperature |
| Boiling Point | 1840.1ºC at 760 mmHg |
| Flash Point | 1066.6ºC |
| Vapour Pressure | 0mmHg at 25°C |
| LogP | 3.898 |
| Hydrogen Bond Donor Count | 18 |
| Hydrogen Bond Acceptor Count | 18 |
| Rotatable Bond Count | 33 |
| Heavy Atom Count | 101 |
| Complexity | 2760 |
| Defined Atom Stereocenter Count | 9 |
| SMILES | CC(C[C@H](NC([C@H](NC([C@@H](NC([C@@H](NC([C@@H](NC([C@@H](NC([C@@H]1CCC(N1)=O)=O)CC2=CN=CN2)=O)CC3=CNC4=CC=CC=C34)=O)CO)=O)CC5=CC=C(O)C=C5)=O)CC6=CC7=CC=CC=C7C=C6)=O)C(N[C@H](C(N8CCC[C@H]8C(NCC(N)=O)=O)=O)CCCNC(N)=N)=O)C.CC(O)=O.O |
| InChi Key | Pyr-His-Trp-Ser-Tyr-D-2-Nal-Leu-Arg-Pro-Gly-NH2 acetate hydrate |
| InChi Code | FSBTYDWUUWLHBD-YSWDAIMKSA-N |
| Chemical Name | RS-94991-298 Nafarelin acetate Nafarelin acetate hydrate Synarel |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| References | Ludwig C, Desmoulins PO, Driancourt MA, Goericke-Pesch S, Hoffmann B. Reversible downregulation of endocrine and germinative testicular function (hormonal castration) in the dog with the GnRH-agonist azagly-nafarelin as a removable implant 'Gonazon'; a preclinical trial. Theriogenology. 2009 Apr 15;71(7):1037-45. doi: 10.1016/j.theriogenology.2008.10.015. Epub 2009 Feb 23. PubMed PMID: 19233456. |
| Additional Infomation |
Nafarelin Acetate can cause developmental toxicity according to state or federal government labeling requirements. A potent synthetic agonist of GONADOTROPIN-RELEASING HORMONE with 3-(2-naphthyl)-D-alanine substitution at residue 6. Nafarelin has been used in the treatments of central PRECOCIOUS PUBERTY and ENDOMETRIOSIS. See also: Nafarelin Acetate (annotation moved to). |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 0.7140 mL | 3.5700 mL | 7.1400 mL | |
| 5 mM | 0.1428 mL | 0.7140 mL | 1.4280 mL | |
| 10 mM | 0.0714 mL | 0.3570 mL | 0.7140 mL |