Physicochemical Properties
| Molecular Formula | C17H22N4O |
| Molecular Weight | 298.39 |
| Exact Mass | 298.179 |
| CAS # | 119193-37-2 |
| PubChem CID | 3970 |
| Appearance | Solid powder |
| Density | 1.36g/cm3 |
| Boiling Point | 522.1ºC at 760mmHg |
| Flash Point | 269.6ºC |
| Vapour Pressure | 5.32E-11mmHg at 25°C |
| Index of Refraction | 1.706 |
| LogP | 2.257 |
| Hydrogen Bond Donor Count | 1 |
| Hydrogen Bond Acceptor Count | 3 |
| Rotatable Bond Count | 2 |
| Heavy Atom Count | 22 |
| Complexity | 428 |
| Defined Atom Stereocenter Count | 0 |
| InChi Key | DDHAJFBBJWHSBR-UHFFFAOYSA-N |
| InChi Code | InChI=1S/C17H22N4O/c1-20-12-7-8-13(20)10-11(9-12)18-17(22)16-14-5-3-4-6-15(14)21(2)19-16/h3-6,11-13H,7-10H2,1-2H3,(H,18,22) |
| Chemical Name | 1-methyl-N-(8-methyl-8-azabicyclo[3.2.1]octan-3-yl)indazole-3-carboxamide |
| Synonyms | LY278584; LY-278584; LY 278584; 119193-37-2; LY-278,584 maleate; 1-Methyl-N-(8-methyl-8-azabicyclo(3.2.1)oct-3-yl)-1H-indazole-3-carboxamide; 1-methyl-N-(8-methyl-8-azabicyclo[3.2.1]octan-3-yl)indazole-3-carboxamide; LY278584; 1-methyl-N-(8-methyl-8-azabicyclo[3.2.1]octan-3-yl)-3-indazolecarboxamide; LY 278584 |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| Targets | 5-HT3 Receptor (Ki = 1.62 nM) |
| ln Vitro | The advent of potent, highly selective 5HT3 receptor antagonists has stimulated considerable interest in 5HT3 receptor mediated physiology and pharmacology. To permit detailed biochemical studies regarding interaction of the indazole class of serotonin (5HT) antagonists with 5HT3 receptors in multiple tissues, we synthesized 1-methyl-N-(8-methyl-8-azabicyclo[3.2.1]oct-3-yl)-1H-indazole- 3-carboxamide (LY278584, compound 9) in high specific activity, tritium-labeled form. This radioligand was selected as a synthetic target because of its potency as a 5HT3-receptor antagonist, its selectivity for this receptor viz a viz other 5HT-receptor subtypes, and the ability to readily incorporate three tritia via the indazole N-CH3 substituent. Alkylation of N-(8-methyl-8-azabicyclo[3.2.1]oct-3-yl)-1H-indazole-3-carboxamide (8) with sodium hydride and tritium-labeled iodomethane, followed by HPLC purification, resulted in [3H]-9 with a radiochemical purity of 99% and a specific activity of 80.5 Ci/mmol. This radioligand bound with high affinity to a single class of saturable recognition sites in membranes isolated from cerebral cortex of rat brain. The Kd was 0.69 nM and the Bmax was 16.9 fmol/mg of protein. The specific binding was excellent, and accounted for 83-93% of total binding at concentrations of 2 nM or less. The potencies of known 5HT3-receptor antagonists as inhibitors of [3H]-9 binding correlated well with their pharmacological receptor affinities as antagonists of 5HT-induced decreases in heart rate and contraction of guinea pig ileum, suggesting the central recognition site for this radioligand may be extremely similar to or identical with peripheral 5HT3 receptors [1]. |
| Cell Assay | We have reported previously that the concentration of intracellular Ca2+ evoked by serotonin (5-HT) was significantly augmented in differentiated NG108-15 (NG) cells treated with dibutyryl cAMP and the enhanced response occurred via 5-HT3 receptors. We investigated changes in the characteristics for specific binding of [(3)H]LY-278584 (a specific antagonist of the 5-HT3 receptor) on membranes from differentiated NG cells. The results indicated that the K(d) and B(max) values for the specific binding to differentiated NG cells were significantly smaller and larger, respectively, than those for undifferentiated NG cells. The binding was significantly inhibited by 10 nM tropisetron, a specific 5-HT3-receptor antagonist, but not by any other types of 5-HT-receptor antagonists. These results suggested that the enhanced response by 5-HT in differentiated NG cells was due to both qualitative and quantitative changes in the 5-HT3 receptor. |
| References |
[1]. Synthesis and biochemical evaluation of tritium-labeled 1-methyl-N-(8-methyl-8-azabicyclo[3.2.1]oct-3-yl)-1H-indazole-3-carboxa mide, a useful radioligand for 5HT3 receptors. J Med Chem. 1990 Dec;33(12):3176-81. [2]. Changes in characteristics of the specific binding of [3H]LY-278584, a 5-HT3-receptor antagonist, on differentiated NG108-15 cells. J Pharmacol Sci . 2010;113(3):281-4. |
| Additional Infomation | 1-methyl-N-(8-methyl-8-azabicyclo[3.2.1]octan-3-yl)-3-indazolecarboxamide is an aromatic amide and a member of indazoles. |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 3.3513 mL | 16.7566 mL | 33.5132 mL | |
| 5 mM | 0.6703 mL | 3.3513 mL | 6.7026 mL | |
| 10 mM | 0.3351 mL | 1.6757 mL | 3.3513 mL |