Isochondrodendrine (Isochondrodendrin) is a bisbenzylisoquinoline alkaloid extracted from Isolona ghesquiereina. Isochondrodendrine has strong antiplasmodial activity against Plasmodium falciparum.

Physicochemical Properties

Molecular Formula	C36H38N2O6
Molecular Weight	594.69672
Exact Mass	594.273
CAS #	477-62-3
PubChem CID	197726
Appearance	Typically exists as solid at room temperature
Density	1.239g/cm3
Boiling Point	689ºC at 760 mmHg
Flash Point	370.5ºC
Vapour Pressure	1.28E-19mmHg at 25°C
Index of Refraction	1.619
LogP	6.432
Hydrogen Bond Donor Count	2
Hydrogen Bond Acceptor Count	8
Rotatable Bond Count	2
Heavy Atom Count	44
Complexity	866
Defined Atom Stereocenter Count	2
SMILES	CN1CCC2=CC(=C(C3=C2C1CC4=CC=C(C=C4)OC5=C6C(CC7=CC=C(O3)C=C7)N(CCC6=CC(=C5O)OC)C)O)OC
InChi Key	XIOGHHPVBVXQIV-VSGBNLITSA-N
InChi Code	InChI=1S/C36H38N2O6/c1-37-15-13-23-19-29(41-3)33(39)35-31(23)27(37)17-21-5-9-26(10-6-21)44-36-32-24(20-30(42-4)34(36)40)14-16-38(2)28(32)18-22-7-11-25(43-35)12-8-22/h5-12,19-20,27-28,39-40H,13-18H2,1-4H3/t27-,28-/m1/s1
Chemical Name	(11R,26R)-5,20-dimethoxy-10,25-dimethyl-2,17-dioxa-10,25-diazaheptacyclo[26.2.2.213,16.13,7.118,22.011,36.026,33]hexatriaconta-1(31),3(36),4,6,13,15,18(33),19,21,28(32),29,34-dodecaene-4,19-diol
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	Plasmodium falciparum[1]
ln Vivo	Strong in vitro antiplasmodial activity of isochondrodendrine has been observed against the chloroquine-resistant Plasmodium falciparum strain FMC29. Compared to cultivated L6 cells, the reported toxicity towards Plasmodium falciparum is 50–100 times higher[1].
References	[1]. Spectral characterisation and antiplasmodial activity of bisbenzylisoquinolines from Isolona ghesquiereina. Planta Med. 2000 Aug;66(6):537-40.
Additional Infomation	Isochondrodendrine is a member of isoquinolines and a bisbenzylisoquinoline alkaloid. Isochondrodendrine has been reported in Cyclea barbata, Cyclea peltata, and other organisms with data available.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	1.6815 mL	8.4076 mL	16.8152 mL
	5 mM	0.3363 mL	1.6815 mL	3.3630 mL
	10 mM	0.1682 mL	0.8408 mL	1.6815 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.