Gliadins (also known as Tyrosylprolylglutaminylprolylglutamine) are a family of monomeric proteins rich in glutamine and proline that play a role in autoimmune diseases such as celiac disease.

Physicochemical Properties

Exact Mass	99.104
CAS #	9007-90-3
PubChem CID	17787981
Sequence	H-DL-Tyr-DL-Pro-DL-Gln-DL-Pro-DL-Gln-OH
SequenceShortening	YPQPQ
Appearance	Typically exists as solid at room temperature
Density	0.8±0.1 g/cm3
Boiling Point	97.6±3.0 °C at 760 mmHg
Flash Point	3.3±0.0 °C
Vapour Pressure	41.5±0.2 mmHg at 25°C
Index of Refraction	1.446
LogP	1.32
Hydrogen Bond Donor Count	7
Hydrogen Bond Acceptor Count	10
Rotatable Bond Count	15
Heavy Atom Count	45
Complexity	1130
Defined Atom Stereocenter Count	0
InChi Key	HZWWPUTXBJEENE-UHFFFAOYSA-N
InChi Code	InChI=1S/C29H41N7O9/c30-18(15-16-5-7-17(37)8-6-16)27(42)35-13-1-3-21(35)25(40)33-19(9-11-23(31)38)28(43)36-14-2-4-22(36)26(41)34-20(29(44)45)10-12-24(32)39/h5-8,18-22,37H,1-4,9-15,30H2,(H2,31,38)(H2,32,39)(H,33,40)(H,34,41)(H,44,45)
Chemical Name	5-amino-2-[[1-[5-amino-2-[[1-[2-amino-3-(4-hydroxyphenyl)propanoyl]pyrrolidine-2-carbonyl]amino]-5-oxopentanoyl]pyrrolidine-2-carbonyl]amino]-5-oxopentanoic acid
Synonyms	Gliadins; 9007-90-3; Gliadin from wheat; Gliadin from Wheat,; GLIADIN; 5-amino-2-[[1-[5-amino-2-[[1-[2-amino-3-(4-hydroxyphenyl)propanoyl]pyrrolidine-2-carbonyl]amino]-5-oxopentanoyl]pyrrolidine-2-carbonyl]amino]-5-oxopentanoic acid; SCHEMBL25214575; DL-tyrosyl-DL-prolyl-DL-glutaminyl-DL-prolyl-DL-glutamine; HZWWPUTXBJEENE-UHFFFAOYSA-N;
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: This product requires protection from light (avoid light exposure) during transportation and storage.
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	Autoimmune disease
ln Vitro	Gliadin is a simple protein, one of the prolamines, derived from the gluten of wheat, rye, etc. May be separated into 4 discrete electrophoretic fractions. It is the toxic factor associated with CELIAC DISEASE. A gliadin fragment can activate the innate immune system, affecting the in situ T-cell recognition of dominant gliadin epitopes. Although our findings emphasise the key role of gliadin-specific T cells, they suggest a complex pathogenic situation, and show that inhibition of interleukin-15 or p38 MAP kinase might have the potential to control coeliac disease.[1]
ln Vivo	Duodenal biopsy samples from 42 patients with untreated coeliac disease, 37 treated patients, and 18 controls, were cultured in vitro for 3 h or 24 h, in the presence of either immunodominant gliadin epitopes (p(alpha)-2 and p(alpha)-9) or a non-immunodominant peptide (p31-43) known to induce small intestine damage in coeliac disease. We also incubated biopsy samples from nine untreated and six treated patients with a non-immunodominant peptide for 3 h, before incubation with immunodominant gliadin epitopes. Different combinations of interleukin-15 or signal transduction inhibitors were added to selected incubations.[1]
Cell Assay	Only the non-immunodominant peptide induced rapid expression of interleukin-15, CD83, cyclo-oxygenase (COX)-2, and CD25 by CD3- cells (p=0.005 vs medium alone) and enterocyte apoptosis (p<0.0001). Only the non-immunodominant peptide induced p38 MAP kinase activation in CD3- cells. Pre-incubation with the non-immunodominant peptide enabled immunodominant epitopes to induce T-cell activation (p=0.001) and enterocyte apoptosis. Inhibition of interleukin-15 or of p38 MAP kinase controlled such activity.[1]
References	[1].Association between innate response to gliadin and activation of pathogenic T cells in coeliac disease. Lancet. 2003 Jul 5;362(9377):30-7.
Additional Infomation	Simple protein, one of the prolamines, derived from the gluten of wheat, rye, etc. May be separated into 4 discrete electrophoretic fractions. It is the toxic factor associated with CELIAC DISEASE. See also: Gliadins (annotation moved to).

Solubility Data

Solubility (In Vitro)

Typically soluble in DMSO (e.g. 10 mM)

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)