Physicochemical Properties
| Molecular Formula | C25H27CL2F2N2O9P |
| Molecular Weight | 639.37 |
| Exact Mass | 638.079 |
| Elemental Analysis | C, 46.96; H, 4.26; Cl, 11.09; F, 5.94; N, 4.38; O, 22.52; P, 4.84 |
| CAS # | 2415715-84-1 |
| PubChem CID | 153563259 |
| Appearance | Solid |
| LogP | 3 |
| Hydrogen Bond Donor Count | 4 |
| Hydrogen Bond Acceptor Count | 11 |
| Rotatable Bond Count | 12 |
| Heavy Atom Count | 41 |
| Complexity | 971 |
| Defined Atom Stereocenter Count | 1 |
| SMILES | ClC1C=CC(=CC=1F)OCC(NC12CCC(CC1)(C[C@@H]2OCOP(=O)(O)O)NC(COC1C=CC(=C(C=1)F)Cl)=O)=O |
| InChi Key | IURMHIZNAHLQRX-ANYOXOOPSA-N |
| InChi Code | InChI=1S/C25H27Cl2F2N2O9P/c26-17-3-1-15(9-19(17)28)37-12-22(32)30-24-5-7-25(8-6-24,21(11-24)39-14-40-41(34,35)36)31-23(33)13-38-16-2-4-18(27)20(29)10-16/h1-4,9-10,21H,5-8,11-14H2,(H,30,32)(H,31,33)(H2,34,35,36)/t21-,24?,25?/m0/s1 |
| Chemical Name | [(2S)-1,4-bis[[2-(4-chloro-3-fluorophenoxy)acetyl]amino]-2-bicyclo[2.2.2]octanyl]oxymethyl dihydrogen phosphate |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| Targets | Eukaryotic translation initiation factor 2B (eIF2B) |
| References | [1]. Martin, et al. Preparation of bicyclooctanyl diamide prodrugs as modulators of the integrated stress pathway useful in treatment of ISR-mediated disorders. World Intellectual Property Organization, WO2020077217 A1. 2020-04-16. |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
注意: 如下所列的是一些常用的体内动物实验溶解配方，主要用于溶解难溶或不溶于水的产品（水溶度<1 mg/mL）。 建议您先取少量样品进行尝试，如该配方可行，再根据实验需求增加样品量。 注射用配方 (IP/IV/IM/SC等) 注射用配方1: DMSO : Tween 80： Saline = 10 : 5 : 85 (如： 100 μL DMSO → 50 μL Tween 80 → 850 μL Saline) *生理盐水/Saline的制备：将0.9g氯化钠/NaCl溶解在100 mL ddH ₂ O中，得到澄清溶液。 注射用配方 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (如： 100 μL DMSO → 400 μL PEG300 → 50 μL Tween 80 → 450 μL Saline) 注射用配方 3: DMSO : Corn oil = 10 : 90 (如： 100 μL DMSO → 900 μL Corn oil) 示例: 以注射用配方 3 (DMSO : Corn oil = 10 : 90) 为例说明, 如果要配制 1 mL 2.5 mg/mL的工作液, 您可以取 100 μL 25 mg/mL 澄清的 DMSO 储备液，加到 900 μL Corn oil/玉米油中, 混合均匀。 注射用配方 4: DMSO : 20% SBE-β-CD in Saline = 10 : 90 [如：100 μL DMSO → 900 μL (20% SBE-β-CD in Saline)] *20% SBE-β-CD in Saline的制备（4°C，储存1周）：将2g SBE-β-CD (磺丁基-β-环糊精) 溶解于10mL生理盐水中，得到澄清溶液。 注射用配方 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (如： 500 μL 2-Hydroxypropyl-β-cyclodextrin (羟丙基环胡精)→ 500 μL Saline) 注射用配方 6: DMSO : PEG300 : Castor oil : Saline = 5 : 10 : 20 : 65 (如： 50 μL DMSO → 100 μL PEG300 → 200 μL Castor oil → 650 μL Saline) 注射用配方 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (如： 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) 注射用配方 8: 溶解于Cremophor/Ethanol (50 : 50), 然后用生理盐水稀释。 注射用配方 9: EtOH : Corn oil = 10 : 90 (如： 100 μL EtOH → 900 μL Corn oil) 注射用配方 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (如： 100 μL EtOH → 400 μL PEG300 → 50 μL Tween 80 → 450 μL Saline) 口服配方 口服配方 1: 悬浮于0.5% CMC Na (羧甲基纤维素钠) 口服配方 2: 悬浮于0.5% Carboxymethyl cellulose (羧甲基纤维素) 示例: 以口服配方 1 (悬浮于 0.5% CMC Na)为例说明, 如果要配制 100 mL 2.5 mg/mL 的工作液, 您可以先取0.5g CMC Na并将其溶解于100mL ddH2O中，得到0.5%CMC-Na澄清溶液；然后将250 mg待测化合物加到100 mL前述 0.5%CMC Na溶液中，得到悬浮液。 口服配方 3: 溶解于 PEG400 (聚乙二醇400) 口服配方 4: 悬浮于0.2% Carboxymethyl cellulose (羧甲基纤维素) 口服配方 5: 溶解于0.25% Tween 80 and 0.5% Carboxymethyl cellulose (羧甲基纤维素) 口服配方 6: 做成粉末与食物混合 注意: 以上为较为常见方法，仅供参考， InvivoChem并未独立验证这些配方的准确性。具体溶剂的选择首先应参照文献已报道溶解方法、配方或剂型，对于某些尚未有文献报道溶解方法的化合物，需通过前期实验来确定（建议先取少量样品进行尝试），包括产品的溶解情况、梯度设置、动物的耐受性等。 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.5640 mL | 7.8202 mL | 15.6404 mL | |
| 5 mM | 0.3128 mL | 1.5640 mL | 3.1281 mL | |
| 10 mM | 0.1564 mL | 0.7820 mL | 1.5640 mL |