Ferutinin is a natural terpenoid that is an estrogen receptor ERα agonist and estrogen ERβ receptor agonist (activator)/antagonist (inhibitor) with IC50 of 33.1 nM and 180.5 nM respectively. Ferutinin, as an electrogenic Ca2+ ionophore, can increase the calcium permeability of lipid bilayer membranes and mitochondria. Ferutinin has estrogenic, antitumor, antibacterial, and anti~inflammatory activities.

Physicochemical Properties

Molecular Formula	C22H30O4
Molecular Weight	358.471207141876
Exact Mass	358.214
CAS #	41743-44-6
PubChem CID	354654
Appearance	White to off-white solid powder
Density	1.2±0.1 g/cm3
Boiling Point	489.0±45.0 °C at 760 mmHg
Flash Point	164.4±22.2 °C
Vapour Pressure	0.0±1.3 mmHg at 25°C
Index of Refraction	1.573
LogP	5.72
Hydrogen Bond Donor Count	2
Hydrogen Bond Acceptor Count	4
Rotatable Bond Count	4
Heavy Atom Count	26
Complexity	561
Defined Atom Stereocenter Count	4
SMILES	CC1=CC[C@]2(CC[C@]([C@@H]2[C@H](C1)OC(=O)C3=CC=C(C=C3)O)(C(C)C)O)C
InChi Key	CYSHNJQMYORNJI-YUVXSKOASA-N
InChi Code	InChI=1S/C22H30O4/c1-14(2)22(25)12-11-21(4)10-9-15(3)13-18(19(21)22)26-20(24)16-5-7-17(23)8-6-16/h5-9,14,18-19,23,25H,10-13H2,1-4H3/t18-,19+,21-,22+/m0/s1
Chemical Name	[(3R,3aS,4S,8aR)-3-hydroxy-6,8a-dimethyl-3-propan-2-yl-1,2,3a,4,5,8-hexahydroazulen-4-yl] 4-hydroxybenzoate
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

ln Vitro	Ferutinin has the ability to cause apoptosis in a range of cell types, including estrogen-dependent cancer cells MCF-7, leukemic T cell lines (Jurkat), colon cancer cells from humans and mice (Caco-2, CT26, HT29), and cancer cells from the bladder (TCC). Ferutinin is suggested as an anti-osteoporotic phytoestrogen because it promotes bone mineralization [2]. Ferutinin induces apoptosis in several cell lines in a manner that is dependent on the mitochondria and dramatically increases the permeability of artificial and cell membranes to Ca2+ ions. Additionally, membrane potential is dose-dependently dissipated by ferunitinin alone (10–60 µM). When Ca2+ ions are present, ferunitin (10–60 µM) significantly depolarizes the inner mitochondrial membrane [2].
References	[1]. Terpenoids found in the umbelliferae family act as agonists/antagonists for ER(alpha) and ERbeta: differential transcription activity between ferutinine-liganded ER(alpha) and ERbeta. Biochem Biophys Res Commun. 2002 Feb 22;291(2):3. [2]. Ferutinin Induces Membrane Depolarization, Permeability Transition Pore Formation, and Respiration Uncoupling in Isolated Rat Liver Mitochondria by Stimulation of Ca 2+-Permeability. J Membr Biol. 2018 Aug;251(4):563-572.
Additional Infomation	Ferutinin is an organic molecular entity. Ferutinine has been reported in Ferula jaeschkeana, Ferula akitschkensis, and other organisms with data available.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	2.7896 mL	13.9482 mL	27.8963 mL
	5 mM	0.5579 mL	2.7896 mL	5.5793 mL
	10 mM	0.2790 mL	1.3948 mL	2.7896 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.