INO2 is a potent inducer of ferroptosis. FINO2 inhibits GPX4 activity. FINO2 is a stable oxidizing agent that oxidizes iron to ferrous oxide and remains stable at different pH values. FINO2 causes extensive lipid peroxidation.

Physicochemical Properties

Molecular Formula	C15H28O3
Molecular Weight	256.381025314331
Exact Mass	256.203
CAS #	869298-31-7
PubChem CID	23815485
Appearance	White to off-white solid powder
Density	1.0±0.1 g/cm3
Boiling Point	323.8±11.0 °C at 760 mmHg
Flash Point	149.6±19.3 °C
Vapour Pressure	0.0±1.6 mmHg at 25°C
Index of Refraction	1.491
LogP	3.6
Hydrogen Bond Donor Count	1
Hydrogen Bond Acceptor Count	3
Rotatable Bond Count	3
Heavy Atom Count	18
Complexity	287
Defined Atom Stereocenter Count	0
InChi Key	RWJLCLCUNHUSPG-UHFFFAOYSA-N
InChi Code	InChI=1S/C15H28O3/c1-13(2,3)12-5-7-15(8-6-12)11-14(4,9-10-16)17-18-15/h12,16H,5-11H2,1-4H3
Chemical Name	2-(8-tert-butyl-3-methyl-1,2-dioxaspiro[4.5]decan-3-yl)ethanol
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: This product requires protection from light (avoid light exposure) during transportation and storage.
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

ln Vitro	In HT-1080 cells, FINO2 (10 µM; 24 hours) causes ferroptosis and demonstrates an iron-dependent lipid peroxidation [1].
References	[1]. FINO2 initiates ferroptosis through GPX4 inactivation and iron oxidation. Nat Chem Biol. 2018 May;14(5):507-515.
Additional Infomation	FINO2 is an oxaspiro compound that is 1,2-dioxaspiro[4.5]decane substituted by methyl, 2-hydroxyethyl and tert-butyl groups at positions 3, 3 and 8, respectivey (the 5s,8s-stereoisomer). It induces ferroptosis in cancer cells by indirectly inhibiting glutathione peroxidase 4 (GPX4) enzymatic function and directly oxidizes iron leading to widespread lipid peroxidation. It has a role as a ferroptosis inducer and an antineoplastic agent. It is an oxaspiro compound, an organic peroxide, a primary alcohol and an organic heterobicyclic compound.

Solubility Data

Solubility (In Vitro)

DMSO : ~50 mg/mL (~195.02 mM)

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	3.9005 mL	19.5023 mL	39.0046 mL
	5 mM	0.7801 mL	3.9005 mL	7.8009 mL
	10 mM	0.3900 mL	1.9502 mL	3.9005 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.