DU-34569 Maleate (Spiroamantadine ; DU34569) is a novel and potent antiviral agent with activity against influenza A, parainfluenza Sendai, coxsackie A21, and rhinovirus.

Physicochemical Properties

Molecular Formula	C18H27NO4
Molecular Weight	321.41128
Exact Mass	321.194
Elemental Analysis	C, 67.26; H, 8.47; N, 4.36; O, 19.91
CAS #	34522-38-8
PubChem CID	6435992
Appearance	Typically exists as solid at room temperature
Boiling Point	268.7ºC at 760 mmHg
Flash Point	128ºC
LogP	2.414
Hydrogen Bond Donor Count	2
Hydrogen Bond Acceptor Count	5
Rotatable Bond Count	2
Heavy Atom Count	23
Complexity	374
Defined Atom Stereocenter Count	0
SMILES	CN1CCC2(C1)C3CC4CC(C3)CC2C4.C(=CC(=O)O)C(=O)O
InChi Key	SWIQYYKGWFIKJQ-BTJKTKAUSA-N
InChi Code	InChI=1S/C14H23N.C4H4O4/c1-15-3-2-14(9-15)12-5-10-4-11(7-12)8-13(14)6-10;5-3(6)1-2-4(7)8/h10-13H,2-9H2,1H3;1-2H,(H,5,6)(H,7,8)/b;2-1-
Chemical Name	(Z)-but-2-enedioic acid;1'-methylspiro[adamantane-2,3'-pyrrolidine]
Synonyms	DU34569 Maleate; DU-34569; 34522-38-8; SPIROAMANTADINE; 1'-Methylspiro(adamantane-2,3'-pyrrolidine)maleate; DU-34569 Maleate; (Z)-but-2-enedioic acid;1'-methylspiro[adamantane-2,3'-pyrrolidine]; NSC136618; NSC 136618; SCHEMBL2397052; DU-34569 Maleate
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	Influenza virus
ln Vitro	A compound, 1′-methyl spiro (adamantane-2,3′-pyrrolidine) maleate, chemically related to the antiviral drug amantadine, was tested for activity in vitro against a number of human respiratory viruses. By a variety of techniques, it was shown to be active against a wide range of human and animal influenza A viruses. The effect was, however, variable and ranged from high activity against two 1957 Asian strains to no observable activity against a 1971 strain. Like amantadine, the drug did not inhibit the growth of influenza B viruses. It was also inactive against a number of paramyxoviruses. Unlike amantadine, the drug did inhibit rhinoviruses, but to a lesser extent than myxoviruses. The coronavirus 229E was also sensitive to the action of the drug in vitro. Although an earlier trial in volunteers showed that, when given orally from 2 days before until 5 days after virus challenge, the drug was protective against infection with influenza A/Hong Kong/68 virus, a similar trial in volunteers challenged with rhinoviruses 2 and 9 revealed no useful activity against rhinoviruses in man [2].
References	[1]. In Vitro Antiviral Activity and Preliminary Clinical Trials of a New Adamantane Compound. Antimicrob Agents Chemother. 1973 Oct;4(4):421–426.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	3.1113 mL	15.5565 mL	31.1129 mL
	5 mM	0.6223 mL	3.1113 mL	6.2226 mL
	10 mM	0.3111 mL	1.5556 mL	3.1113 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.