DPDPE is an opioid peptide and a selective opioid receptor (DOR) agonist with anticonvulsant (antiepileptic/antiseizure) properties.

Physicochemical Properties

Molecular Formula	C30H39N5O7S2
Molecular Weight	645.79
Exact Mass	645.229
CAS #	88373-73-3
Related CAS #	DPDPE TFA;172888-59-4
PubChem CID	104787
Appearance	White to off-white solid powder
Density	1.4±0.1 g/cm3
Boiling Point	1038.6±65.0 °C at 760 mmHg
Flash Point	581.9±34.3 °C
Vapour Pressure	0.0±0.3 mmHg at 25°C
Index of Refraction	1.653
LogP	2.24
Hydrogen Bond Donor Count	7
Hydrogen Bond Acceptor Count	10
Rotatable Bond Count	7
Heavy Atom Count	44
Complexity	1040
Defined Atom Stereocenter Count	4
SMILES	CC1([C@H](C(=O)NCC(=O)N[C@H](C(=O)N[C@H](C(SS1)(C)C)C(=O)O)CC2=CC=CC=C2)NC(=O)[C@H](CC3=CC=C(C=C3)O)N)C
InChi Key	MCMMCRYPQBNCPH-WMIMKTLMSA-N
InChi Code	InChI=1S/C30H39N5O7S2/c1-29(2)23(34-25(38)20(31)14-18-10-12-19(36)13-11-18)27(40)32-16-22(37)33-21(15-17-8-6-5-7-9-17)26(39)35-24(28(41)42)30(3,4)44-43-29/h5-13,20-21,23-24,36H,14-16,31H2,1-4H3,(H,32,40)(H,33,37)(H,34,38)(H,35,39)(H,41,42)/t20-,21-,23-,24-/m0/s1
Chemical Name	(4S,7S,13S)-13-[[(2S)-2-amino-3-(4-hydroxyphenyl)propanoyl]amino]-7-benzyl-3,3,14,14-tetramethyl-6,9,12-trioxo-1,2-dithia-5,8,11-triazacyclotetradecane-4-carboxylic acid
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment, avoid exposure to moisture.
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	δ Opioid Receptor/DOR
ln Vivo	DPDPE has anticonvulsant effects in rats at doses of 70 or 140 nM (icv; once)[1]. Bicuculline-induced convulsions in mice are enhanced by DPDPE (0.78–25 μg/mouse; icv; once)[2].
Animal Protocol	Animal/Disease Models: Male Sprague- Dawley rats (225-275 g)[1] Doses: 70 or 140 nM followed by a 2 μl saline flush Route of Administration: Intracerebroventricular injection Experimental Results: Resulted in a significant, dose-dependent increase in the convulsive threshold to flurothyl. Animal/Disease Models: Male ddY mice weighing 20–30 g, pretreated with 1.5 mg/kg bicuculline (subcutaneous (sc) injection)[2]. Doses: 0.78–25 μg/mouse, once Route of Administration: Intracerebroventricular injection Experimental Results: Caused a dose-dependent increase in the proportion of mice exhibiting convulsions.
References	[1]. Anticonvulsant Effects of Mu (DAGO) and Delta (DPDPE) Enkephalins in Rats. Peptides. [2]. Effects of differential modulation of mu-, delta- and kappa-opioid systems on bicuculline-induced convulsions in the mouse. Brain Res. 2000 Apr 17;862(1-2):120-6.
Additional Infomation	DPDPE is a heterodetic cyclic peptide that is a cyclic enkephalin analogue, having D-penicillaminyl residues located at positions 2 and 5, which form the heterocycle via a disulfide bond. It has a role as a delta-opioid receptor agonist. A heterodetic cyclic peptide that is a cyclic enkephalin analogue, having D-penicillaminyl residues located at positions 2 and 5, which form the heterocycle via a disulfide bond. A disulfide opioid pentapeptide that selectively binds to the DELTA OPIOID RECEPTOR. It possesses antinociceptive activity.

Solubility Data

Solubility (In Vitro)

H2O: 10 mg/mL (15.48 mM)

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	1.5485 mL	7.7425 mL	15.4849 mL
	5 mM	0.3097 mL	1.5485 mL	3.0970 mL
	10 mM	0.1548 mL	0.7742 mL	1.5485 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.