Physicochemical Properties
| Molecular Formula | C34H60N3O6+ |
| Molecular Weight | 606.87 |
| Exact Mass | 641.417 |
| CAS # | 100488-87-7 |
| PubChem CID | 107756 |
| Appearance | Off-white to light yellow solid powder |
| LogP | 8.674 |
| Hydrogen Bond Donor Count | 1 |
| Hydrogen Bond Acceptor Count | 7 |
| Rotatable Bond Count | 27 |
| Heavy Atom Count | 44 |
| Complexity | 722 |
| Defined Atom Stereocenter Count | 0 |
| InChi Key | APUCCVGQZPNXIO-UHFFFAOYSA-N |
| InChi Code | InChI=1S/C34H59N3O6.ClH/c1-5-7-8-9-10-11-12-13-14-15-16-17-18-19-20-22-25-35-33(39)42-28-32(41-4)29-43-34(40)37(30(3)38)27-31-24-21-23-26-36(31)6-2;/h21,23-24,26,32H,5-20,22,25,27-29H2,1-4H3;1H |
| Chemical Name | [2-methoxy-3-(octadecylcarbamoyloxy)propyl] N-acetyl-N-[(1-ethylpyridin-1-ium-2-yl)methyl]carbamate;chloride |
| Synonyms | CV6209; CV 6209; CV-6209 |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment, avoid exposure to moisture. |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| ln Vitro | CV-6209 reduces PAF (30 nM)-stimulated [3H]serotonin release from rabbit platelets [1]. CV-6209 has no effect on platelet aggregation caused by arachidonic acid, ADP, or collagen [1]. CV-6209 (0.2-2 μM; 30 min pretreatment) suppresses PAF-induced MC degranulation in LAD2 and hLMC [1]. |
| ln Vivo | CV-6209 (iv) shows a favorable reaction to arachidonic acid, histamine, bradykinin, and isoproterenol-induced hypotension in rats (ED50=0.009 mg/kg) and reduces PAF (0.3 μg/kg; iv)-induced hypotension. Hypotension doesn't matter [1]. Asparaginase-induced hypersensitivity was lessened by CV-6209 (66 μg; i.v.) when compared to sensitized mice that were not pretreated [3]. |
| References |
[1]. CV-6209, a highly potent antagonist of platelet activating factor in vitro and in vivo. J Pharmacol Exp Ther. 1987 Jul;242(1):263-8. [2]. Effects of Rupatadine on Platelet- Activating Factor-Induced Human Mast Cell Degranulation Compared With Desloratadine and Levocetirizine (The MASPAF Study). J Investig Allergol Clin Immunol. 2017;27(3):161-168. [3]. Effect of premedications in a murine model of asparaginase hypersensitivity. J Pharmacol Exp Ther. 2015 Mar;352(3):541-51. |
Solubility Data
| Solubility (In Vitro) | DMSO : ~100 mg/mL (~155.69 mM) |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.6478 mL | 8.2390 mL | 16.4780 mL | |
| 5 mM | 0.3296 mL | 1.6478 mL | 3.2956 mL | |
| 10 mM | 0.1648 mL | 0.8239 mL | 1.6478 mL |