 Chemical Structure.png)
Physicochemical Properties
| Molecular Formula | C22H43N5O13.9/5H2O4S |
| Molecular Weight | 762.14 |
| Exact Mass | 781.22 |
| CAS # | 149022-22-0 |
| Related CAS # | Amikacin hydrate;1257517-67-1;Amikacin disulfate;39831-55-5;Amikacin;37517-28-5 |
| PubChem CID | 5458175 |
| Appearance | White to off-white solid powder |
| Boiling Point | 981.8ºC at 760mmHg |
| Flash Point | 547.6°C |
| Vapour Pressure | 0mmHg at 25°C |
| Hydrogen Bond Donor Count | 15 |
| Hydrogen Bond Acceptor Count | 21 |
| Rotatable Bond Count | 10 |
| Heavy Atom Count | 45 |
| Complexity | 900 |
| Defined Atom Stereocenter Count | 16 |
| SMILES | S(=O)(=O)(O[H])O[H].O([C@]1([H])[C@@]([H])([C@]([H])([C@@]([H])([C@@]([H])(C([H])([H])O[H])O1)O[H])N([H])[H])O[H])[C@]1([H])[C@]([H])([C@@]([H])([C@]([H])(C([H])([H])[C@@]1([H])N([H])C([C@]([H])(C([H])([H])C([H])([H])N([H])[H])O[H])=O)N([H])[H])O[C@]1([H])[C@@]([H])([C@]([H])([C@@]([H])([C@@]([H])(C([H])([H])N([H])[H])O1)O[H])O[H])O[H])O[H] |
| InChi Key | HIBICIOPDUTNRR-XTHCGPPUSA-N |
| InChi Code | InChI=1S/C22H43N5O13.H2O4S/c23-2-1-8(29)20(36)27-7-3-6(25)18(39-22-16(34)15(33)13(31)9(4-24)37-22)17(35)19(7)40-21-14(32)11(26)12(30)10(5-28)38-21;1-5(2,3)4/h6-19,21-22,28-35H,1-5,23-26H2,(H,27,36);(H2,1,2,3,4)/t6-,7+,8-,9+,10+,11-,12+,13+,14+,15-,16+,17-,18+,19-,21+,22+;/m0./s1 |
| Chemical Name | (2S)-4-amino-N-[(1R,2S,3S,4R,5S)-5-amino-2-[(2S,3R,4S,5S,6R)-4-amino-3,5-dihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4-[(2R,3R,4S,5S,6R)-6-(aminomethyl)-3,4,5-trihydroxyoxan-2-yl]oxy-3-hydroxycyclohexyl]-2-hydroxybutanamide;sulfuric acid |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| Targets | Aminoglycoside |
| ln Vitro | There are clear benefits to using amikacin to treat infections brought on by organisms resistant to other aminoglycosides. Relatively few arninoglycoside-modifying enzymes have an impact on amikacin. Mycobacterium avium-intracellulare, Nocardia asteroides, and two species of "rapid-growing" mycobacteria—M. chelonae and M. fortuitumi—may all cause infections that amikacin can help treat[1]. With an LD50 of 453 μM, amikacin (100-1500 μM) consistently causes lateral line zebrafish hair cell loss[3]. |
| ln Vivo | Treatment with amikacin (320 mg/kg; subcutaneous injection; daily; for 10 days; male Fischer rats) raises the risk of significant hearing loss in rats in vivo[3]. |
| Animal Protocol |
Animal/Disease Models: Male Fischer 344 rats (40-50-day-old)[3] Doses: 320 mg/kg Route of Administration: subcutaneous (sc)injection; daily; for 10 days Experimental Results: Induced hearing loss in rats. |
| References |
[1]. Edson, R.S. and C.L. Terrell, The aminoglycosides. Mayo Clin Proc, 1999. 74(5): p. 519-28. [2]. An overview of amikacin. Ther Drug Monit. 1985;7(1):12-25. [3]. ORC-13661 Protects Sensory Hair Cells From Aminoglycoside and Cisplatin Ototoxicity. JCI Insight. 2019 Aug 8;4(15):e126764. |
| Additional Infomation |
Amikacin Sulfate is the sulfate salt of amikacin, a broad-spectrum semi-synthetic aminoglycoside antibiotic, derived from kanamycin with antimicrobial property. Amikacin irreversibly binds to the bacterial 30S ribosomal subunit, specifically in contact with 16S rRNA and S12 protein within the 30S subunit. This leads to interference with translational initiation complex and misreading of mRNA, thereby hampering protein synthesis and resulting in bactericidal effect. This agent is usually used in short-term treatment of serious infections due to susceptible strains of Gram-negative bacteria. A broad-spectrum antibiotic derived from KANAMYCIN. It is reno- and oto-toxic like the other aminoglycoside antibiotics. Drug Indication Arikayce liposomal is indicated for the treatment of non-tuberculous mycobacterial (NTM) lung infections caused by Mycobacterium avium Complex (MAC) in adults with limited treatment options who do not have cystic fibrosis. Treatment of nontuberculous mycobacterial lung infection, Treatment of Pseudomonas aeruginosa lung infection/colonisation in cystic fibrosis patients |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.3121 mL | 6.5605 mL | 13.1209 mL | |
| 5 mM | 0.2624 mL | 1.3121 mL | 2.6242 mL | |
| 10 mM | 0.1312 mL | 0.6560 mL | 1.3121 mL |