Alprostadil alfadex is a medication used to treat erectile dysfunction. It is alfadex in complex with Alprostadil (Prostaglandin-E1), which is a naturally occurring prostaglandin and a potent vasodilator used in the treatment of infants with congenital heart defects to maintain the patency of the ductus arteriosus until palliative or corrective surgery can be performed. It is also a drug for treating erectile dysfunction and has vasodilatory properties. In infants with defects restricting pulmonary blood flow (cyanotic), alprostadil improves arterial blood oxygenation. In infants with defects restricting systemic blood flow, alprostadil improves arterial blood pH, urine output, and femoral arterial pulses. Alprostadil is administered by continuous intraarterial or intravenous infusion, usually at a starting dose of 0.1 microgram/kg/min, with maintenance doses as low as 0.002 microgram/kg/min.
Physicochemical Properties
| Molecular Formula | C36H60O30.C20H34O5 |
| Molecular Weight | 1327.32456 |
| Exact Mass | 1326.56 |
| CAS # | 55648-20-9 |
| Related CAS # |
35900-16-4 (Alprostadil ethyl ester); 55648-20-9 (Alprostadil alfadex); 217182-28-0 (Alprostadil isopropyl ester); 27930-45-6 ( Alprostadil sodium) |
| PubChem CID | 5282234 |
| Appearance | Typically exists as solid at room temperature |
| Hydrogen Bond Donor Count | 21 |
| Hydrogen Bond Acceptor Count | 35 |
| Rotatable Bond Count | 19 |
| Heavy Atom Count | 91 |
| Complexity | 1680 |
| Defined Atom Stereocenter Count | 34 |
| SMILES | CCCCCC(C=CC1C(CC(=O)C1CCCCCCC(=O)O)O)O.C(C1C2C(C(C(O1)OC3C(OC(C(C3O)O)OC4C(OC(C(C4O)O)OC5C(OC(C(C5O)O)OC6C(OC(C(C6O)O)OC7C(OC(O2)C(C7O)O)CO)CO)CO)CO)CO)O)O)O |
| InChi Key | LYRPNNXUPAXZGU-OJQZDGIKSA-N |
| InChi Code | InChI=1S/C36H60O30.C20H34O5/c37-1-7-25-13(43)19(49)31(55-7)62-26-8(2-38)57-33(21(51)15(26)45)64-28-10(4-40)59-35(23(53)17(28)47)66-30-12(6-42)60-36(24(54)18(30)48)65-29-11(5-41)58-34(22(52)16(29)46)63-27-9(3-39)56-32(61-25)20(50)14(27)44;1-2-3-6-9-15(21)12-13-17-16(18(22)14-19(17)23)10-7-4-5-8-11-20(24)25/h7-54H,1-6H2;12-13,15-17,19,21,23H,2-11,14H2,1H3,(H,24,25)/b;13-12+/t7-,8-,9-,10-,11-,12-,13-,14-,15-,16-,17-,18-,19-,20-,21-,22-,23-,24-,25-,26-,27-,28-,29-,30-,31-,32-,33-,34-,35-,36-;15-,16+,17+,19+/m10/s1 |
| Chemical Name | (1S,3R,5R,6S,8R,10R,11S,13R,15R,16S,18R,20R,21S,23R,25R,26S,28R,30R,31R,32R,33R,34R,35R,36R,37R,38R,39R,40R,41R,42R)-5,10,15,20,25,30-hexakis(hydroxymethyl)-2,4,7,9,12,14,17,19,22,24,27,29-dodecaoxaheptacyclo[26.2.2.23,6.28,11.213,16.218,21.223,26]dotetracontane-31,32,33,34,35,36,37,38,39,40,41,42-dodecol;7-[(1R,2R,3R)-3-hydroxy-2-[(E,3S)-3-hydroxyoct-1-enyl]-5-oxocyclopentyl]heptanoic acid |
| Synonyms | Alprostadil alfadex; 55648-20-9; Tandetoron;; G 511; PGE1 a-CD;; Alprostadil cyclodextrin; Tandetoron; Prostaglandin E1-a-cyclodextrin compound; |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| ln Vitro | Alprostadil alfadex is an organic molecular entity. |
| ln Vivo | Prostaglandin E1 (PGE1) (30, 60, 120 micrograms) was administered by intravenous infusion over a 120 min period in an open, three way randomized, cross-over study to 12 healthy male volunteers. For the evaluation of PGE1, PGE0 and 15-keto-PGE0, blood samples were drawn prior to, during and after the infusion. Analytical measurements were performed by gas chromatography/negative ion chemical ionization triple stage quadruple mass spectrometry, a highly specific and sensitive GC/MS/MS-method. During intravenous infusion of 30, 60 and 120 micrograms PGE1, endogenous plasma PGE1 concentrations increased from 1.7 +/- 0.8 to 4.2 +/- 1.1, 6.7 +/- 1.0 and 11.0 +/- 1.9 pg ml-1 respectively. PGE0 plasma concentrations increased from endogenous levels of 1.3 +/- 1.0 pg ml-1 to 7.6 +/- 2.1, 14.1 +/- 3.7 and 28.0 +/- 3.0 pg ml-1 respectively, whilst 15-keto-PGE0 plasma concentrations increased from endogenous levels of 10.2 +/- 13.9 pg ml-1 to 99.3 +/- 27.9, 190.4 +/- 52.5 and 357.2 +/- 72.6 pg ml-1 respectively. Within the dose range of 30-120 micrograms PGE1 2 h-1 there was a linear increase of Cmax and AUC with the dose. The results of the analysis of variance after baseline and dose-correction show a 90% confidence interval in the bioequivalence acceptance range of 80 to 125%[1]. |
| References |
[1]. Br J Clin Pharmacol.1995 Sep;40(3):273-6; [2]. Drug Intell Clin Pharm.1982 Nov;16(11):823-32; [3]. Int J Impot Res.2002 Dec;14(6):498-501. |
| Additional Infomation |
Alprostadil alfadex is an organic molecular entity. See also: Alprostadil (annotation moved to). |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 0.7534 mL | 3.7670 mL | 7.5339 mL | |
| 5 mM | 0.1507 mL | 0.7534 mL | 1.5068 mL | |
| 10 mM | 0.0753 mL | 0.3767 mL | 0.7534 mL |