Physicochemical Properties
| Molecular Formula | C13H7CL3O |
| Molecular Weight | 285.55 |
| Exact Mass | 283.956 |
| CAS # | 118174-38-2 |
| PubChem CID | 114900 |
| Appearance | Typically exists as solid at room temperature |
| LogP | 6.1 |
| Hydrogen Bond Donor Count | 0 |
| Hydrogen Bond Acceptor Count | 1 |
| Rotatable Bond Count | 0 |
| Heavy Atom Count | 17 |
| Complexity | 298 |
| Defined Atom Stereocenter Count | 0 |
| InChi Key | RPMARRQIRRJWEZ-UHFFFAOYSA-N |
| InChi Code | InChI=1S/C13H7Cl3O/c1-6-2-7(14)3-9-12-10(16)4-8(15)5-11(12)17-13(6)9/h2-5H,1H3 |
| Chemical Name | 1,3,8-trichloro-6-methyldibenzofuran |
| HS Tariff Code | 2934.99.9001 |
| Storage |
Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition | Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs) |
Biological Activity
| Targets | Aryl hydrocarbon receptor (AhR) [1][2] Prostatic VEGF[1] Estrogenic[1] |
| ln Vitro | AhR modulator-1 (6-MCDF; 0.1-10 μM; 48-96 hours; ASPC-1 cells) treatment demonstrates dose-dependent growth inhibitory effects with growth inhibitory effects of 26, 43 and 99% at doses of 0.1, 1 and 10 μM, respectively[2]. |
| ln Vivo | In C57BL/6-Tg(TRAMP)8247Ng/J mice, therapy with AhR modulator-1 (6-MCDF; 0–40 mg/kg; oral dose; daily; for 12 weeks) decreases the incidence of pelvic lymph node metastases. Furthermore, serum VEGF concentrations are lowered. There is no discernible decrease in the incidence or size of prostate tumors[1]. |
| Cell Assay |
Cell Proliferation Assay[2] Cell Types: ASPC-1 cells Tested Concentrations: 0.1 μM, 1 μM and 10 μM Incubation Duration: 48 hrs (hours), 72 hrs (hours), 96 hrs (hours) Experimental Results: demonstrated dose-dependent growth inhibitory effects. |
| Animal Protocol |
Animal/Disease Models: C57BL/6-Tg(TRAMP)8247Ng/J (TRAMP) mice (8-week -old)[1] Doses: 0 mg/kg, 10 mg/kg, 40 mg/kg Route of Administration: Oral administration; daily; for 12 weeks Experimental Results: The frequency of pelvic lymph node metastasis was decreased 5-fold in mice fed the 40 mg/kg diet.Serum VEGF concentrations were also decreased. |
| ADME/Pharmacokinetics |
Metabolism / Metabolites No information on the metabolism of dibenzofuran in mammalian organisms was found in the available literature. The bacteria Sphingomonas, Brevibacterium, Terrabacter, and Staphylococcus auricularis degrade dibenzofuran to 2,2',3-trihydroxybiphenyl via dibenzofuran 4,4a-dioxygenase. (L952) |
| Toxicity/Toxicokinetics |
Toxicity Summary Halogenated dibenzofurans (PCDFs and PBDFs) bind the aryl hydrocarbon receptor (AhR), which increases its ability to activate transcription in the XRE (xenobiotic resoponse element) promoter region. Specifically AhR binds to the PCDF, translocates it to the nucleus and together with hydrocarbon nuclear translocator (ARNT) and xenobiotic responsive element (XRE) increases the expression of CYP1A1 and aryl hydrocarbon hydroxylase (CYP1B1). AhR signaling also increseases conversion of arachidonic acid to prostanoids via cyclooxygenase-2, alters Wnt/beta-catenin signaling downregulating Sox9 and alters signaling by receptors for inflammatory cytokines. AhR signalling also alters proteasomal degradation of steroid hormone receptors, alters cellular UVB stress response and changes the differentiation of certain T-cell subsets. The resulting AhR mediated activation and alteration leads to body weight loss, cancer and thymic atrophy (characteristic of immune and endocrine disruption) which are common toxic responses to PCDFs and related toxic halogenated aryl hydrocarbons. |
| References |
[1]. The selective aryl hydrocarbon receptor modulator 6-methyl-1,3,8-trichlorodibenzofuran inhibits prostate tumor metastasis in TRAMP mice. Biochem Pharmacol. 2009 Apr 1;77(7):1151-60. [2]. Increased arylhydrocarbon receptor expression offers a potential therapeutic target for pancreatic cancer. Oncogene. 2002 Sep 5;21(39):6059-70. |
| Additional Infomation | Chlorinated dibenzofurans (CDFs) are a family of chemical that contain one to eight chlorine atoms attached to the carbon atoms of the parent chemical, dibenzofuran. The CDF family contains 135 individual compounds (known as congeners) with varying harmful health and environmental effects. Of these 135 compounds, those that contain chlorine atoms at the 2,3,7,8-positions of the parent dibenzofuran molecule are especially harmful. Other than for laboratory use of small amounts of CDFs for research and development purposes, these chemicals are not deliberately produced by industry. Most CDFs are produced in very small amounts as unwanted impurities of certain products and processes utilizing chlorinated compounds. Only a few of the 135 CDF compounds have been produced in large enough quantities so that their properties, such as color, smell, taste, and toxicity could be studied. (L952) |
Solubility Data
| Solubility (In Vitro) | May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples |
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 3.5020 mL | 17.5101 mL | 35.0201 mL | |
| 5 mM | 0.7004 mL | 3.5020 mL | 7.0040 mL | |
| 10 mM | 0.3502 mL | 1.7510 mL | 3.5020 mL |