AZT triphosphate (3'-Azido-3'-deoxythymidine-5'-triphosphate) TEA is an active triphosphate metabolite of Zidovudine (AZT). AZT triphosphate TEA has antiretroviral activity and inhibits HIV replication. AZT triphosphate TEA can also inhibit HBV (hepatitis B virus) DNA polymerase. AZT triphosphate TEA activates the mitochondria-mediated apoptosis pathway.

Physicochemical Properties

Molecular Formula	C16H31N6O13P3
Molecular Weight	608.37
Related CAS #	AZT triphosphate tetraammonium;106060-92-8;AZT triphosphate;92586-35-1
Appearance	Typically exists as solid at room temperature
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	DNA synthesis
ln Vitro	In H9c2 cells treated with 100 μM zidovudine (AZT) for 48 hours, the accumulation of AZT triphosphate TEA(3'-Azido-3'-deoxythymidine-5'-triphosphate) causes disruptions in the mitochondrial tubular network. Drp1 is upregulated and Opa1 is downregulated as a result of AZT triphosphate TEA TEA buildup. In the rat embryonic myoblast H9c2 cell model, AZT triphosphate TEA TEA disrupts the balance of the mitochondrial quality control system, results in mitochondrial malfunction, and increases the generation of lethal reactive oxygen species (ROS) [1].
ln Vivo	Low-dose AZT administration to non-obese diabetic/severe combined immunodeficiency (NOD/SCID) mice injected with transduced K562 cells suppressed tumor growth. This novel suicide gene therapy approach can thus be integrated as a safety switch into therapeutic vectors.[2]
Enzyme Assay	Acyclovir (ACV) triphosphate and azidothymidine (AZT) triphosphate inhibit the DNA polymerase of human hepatitis B virus (HBV) by 50% at submicromolar concentrations, but no effects of ACV or AZT treatment have been noted on the clinical manifestations of hepatitis B. We synthesized 1-O-octadecyl-sn-glycero-3-phospho-acyclovir (ODG-P-ACV), 1-O-hexadecylpropanediol-3-phospho-acyclovir (HDP-P-ACV), and 1-O-octadecyl-sn-glycero-3-phospho-azidothymidine (ODG-P-AZT), and evaluated their antiviral activity in human hepatoma cells that constitutively produce HBV (2.2.15 cells). ACV and AZT up to 100 microM caused only slight inhibition of HBV replication in 2.2.15 cells. However, HDP-P-ACV and ODG-P-ACV inhibited viral replication by 50% at 0.5 and 6.8 microM, respectively. ODG-P-AZT also showed increased antiviral activity, with a 50% reduction in HBV replication at 2.1 microM. Based on the EC50, HDP-P-ACV, ODG-P-ACV, and ODG-P-AZT were > 200, > 14.7, and > 48 times more active than their free nucleosides in reducing HBV replication in 2.2.15 cells. To evaluate the biochemical basis for the increased antiviral activity, we studied the uptake and metabolism of 1-O-octadecyl-sn-glycero-3-phospho-[3H]acyclovir (ODG-P-[3H]ACV) in HepG2 cells. Cellular uptake of ODG-P-[3H]ACV was found to be substantially greater than that of [3H]ACV, and cellular levels of ACV-mono-, -di-, and -triphosphate were much higher with ODG-P-ACV. ODG-P-[3H]ACV was well absorbed orally. Based on urinary recovery of tritium after oral or parenteral administration of the radiolabeled compounds, oral absorption of ODG-P-ACV in mice was 100% versus 37% for ACV. ODG-P-ACV plasma area under the curve was more than 7-fold greater than that of ACV. Lipid prodrugs of this type may be useful orally in treating viral diseases.[3]
Cell Assay	Gene therapy and stem cell transplantation safety could be enhanced by control over the fate of therapeutic cells. Suicide gene therapy uses enzymes that convert prodrugs to cytotoxic entities; however, heterologous moieties with poor kinetics are employed. We describe a novel enzyme/prodrug combination for selectively inducing apoptosis in lentiviral vector-transduced cells. Rationally designed variants of human thymidylate kinase (tmpk) that effectively phosphorylate 3'-azido-3'-deoxythymidine (AZT) were efficiently delivered. Transduced Jurkat cell lines were eliminated by AZT. We demonstrate that this schema targeted both dividing and non-dividing cells, with a novel killing mechanism involving apoptosis induction via disruption of the mitochondrial inner membrane potential and activation of caspase-3. Primary murine and human T cells were also transduced and responded to AZT. [2]
References	[1]. Azidothymidine-triphosphate Impairs Mitochondrial Dynamics by Disrupting the Quality Control System. Redox Biol. 2017 Oct;13:407-417. [2]. Engineered Human tmpk/AZT as a Novel Enzyme/Prodrug Axis for Suicide Gene Therapy. Mol Ther. 2007 May;15(5):962-70. [3]. Enhanced Oral Absorption and Antiviral Activity of 1-O-octadecyl-sn-glycero-3-phospho-acyclovir and Related Compounds in Hepatitis B Virus Infection, in Vitro. Biochem Pharmacol. 1997 Jun 15;53(12):1815-22.

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	1.6437 mL	8.2187 mL	16.4374 mL
	5 mM	0.3287 mL	1.6437 mL	3.2875 mL
	10 mM	0.1644 mL	0.8219 mL	1.6437 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.