(Rac)-3′-Hydroxy simvastatin is a major metabolite of Simvastatin which is a competitive inhibitor of HMG-CoA reductase with a Ki of 0.2 nM.

Physicochemical Properties

Molecular Formula	C₂₅H₃₈O₆
Molecular Weight	434.57
Exact Mass	434.267
CAS #	126313-98-2
PubChem CID	74603305
Appearance	Typically exists as solid at room temperature
Index of Refraction	1.542
LogP	3.556
Hydrogen Bond Donor Count	2
Hydrogen Bond Acceptor Count	6
Rotatable Bond Count	7
Heavy Atom Count	31
Complexity	738
Defined Atom Stereocenter Count	0
SMILES	O[C@H]1CC(=O)O[C@H](CC[C@@H]2[C@@H]3C(=C[C@H](C)C[C@@H]3OC(C(C)(C)C(C)O)=O)C=C[C@@H]2C)C1
InChi Key	MTOKLGKFIIZWRP-UHFFFAOYSA-N
InChi Code	InChI=1S/C25H38O6/c1-14-10-17-7-6-15(2)20(9-8-19-12-18(27)13-22(28)30-19)23(17)21(11-14)31-24(29)25(4,5)16(3)26/h6-7,10,14-16,18-21,23,26-27H,8-9,11-13H2,1-5H3
Chemical Name	[8-[2-(4-hydroxy-6-oxooxan-2-yl)ethyl]-3,7-dimethyl-1,2,3,7,8,8a-hexahydronaphthalen-1-yl] 3-hydroxy-2,2-dimethylbutanoate
Synonyms	(Rac)3′Hydroxy simvastatin; 126313-98-2; (Rac)-3'-Hydroxy simvastatin; Butanoic acid, 3-hydroxy-2,2-dimethyl-, 1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)ethyl]-1-naphthalenyl ester; [8-[2-(4-hydroxy-6-oxooxan-2-yl)ethyl]-3,7-dimethyl-1,2,3,7,8,8a-hexahydronaphthalen-1-yl] 3-hydroxy-2,2-dimethylbutanoate; HY-136345; CS-0128378; (Rac)-3 inverted exclamation marka-Hydroxy simvastatin(Rac) 3′ Hydroxy simvastatin
HS Tariff Code	2934.99.9001
Storage	Powder-20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Biological Activity

Targets	Simvastatin metabolite; HMG-CoA reductase
References	[1]. Mechanism of action and biological profile of HMG CoA reductase inhibitors. A new therapeutic alternative. Drugs, 1988. 36 Suppl 3: p. 72-82.
Additional Infomation	Lovastatin (MK-803, mevinolin) and simvastatin (MK-733, synvinolin), 2 highly potent 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA) reductase inhibitors, have been heralded as breakthrough therapy for the treatment of atherosclerotic disease. This paper discusses the biochemical attributes of these HMG CoA reductase inhibitors, their structures and inhibitory properties in a variety of biological systems and presents the rationale for their therapeutic use. Not only do lovastatin and simvastatin potently inhibit cholesterol biosynthesis; they also can result in the induction of hepatic low density lipoprotein (LDL) receptors, thus increasing the catabolism of LDL-cholesterol. Lovastatin and simvastatin are the first HMG CoA reductase inhibitors to receive regulatory agency approval for marketed use. Their safety profiles are reviewed and 2 aspects of this evaluation are stressed. First, the objective in the clinical use of these inhibitors is to normalise plasma cholesterol levels in hypercholesterolaemic individuals. This contrasts with the profound reductions in cholesterol obtained when normocholesterolaemic animals are treated by the high doses of these drugs required for toxicological assessment. Second, both lovastatin and simvastatin are administered as prodrugs in their lactone forms. As lactones, they readily undergo first-pass metabolism, hepatic sequestration and hydrolysis to the active form. Consequently, lovastatin and simvastatin achieve lower plasma drug levels than do other HMG CoA reductase inhibitors in clinical development. Low plasma levels have been established as an important determinant of safety in the use of HMG CoA reductase inhibitors in both animal and human studies.[1]

Solubility Data

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] *Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.  (Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	2.3011 mL	11.5056 mL	23.0113 mL
	5 mM	0.4602 mL	2.3011 mL	4.6023 mL
	10 mM	0.2301 mL	1.1506 mL	2.3011 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.